Band Saws Blades

CS Unitec's SuperBand™ saw blades are made of tough M42 steel. 8% cobalt gives our blades the highest heat resistance and wear resistance of all portable band saw blades. The hardness is Rc 67-69.

SuperBand™ saw blades easily cut most ferrous and nonferrous metals, including steel, stainless steel, Inconel, chrome, Hastelloy, tool steels, "super" alloys and other materials. Longer life, fewer blade changes and the fastest cutting rates result in SuperBand™ providing the lowest cost per cut.

 M42 Cobalt Steel SuperBand Saw Blades

 

Blades for standard saws (Model Nos. 5 6003 0010, 5 6046 0010 and 5 6043 0010)

No. 9 2506 0010

18 TPI

 Cuts material 1/8" - 1/4" thick

44-7/8" L x 1/2" W x .025" T

No. 9 2506 0020

14 TPI

Cuts material 3/16 " - 1/2" thick

44-7/8" L x 1/2" W x .025" T

No. 9 2506 0030

10/14 TPI*

 Cuts material 3/16 " - 1/2" thick

44-7/8" L x 1/2" W x .025" T

No. 9 2506 0040

 8/12 TPI*

Cuts material 1/2" and thicker

44-7/8" L x 1/2" W x .025" T

Blades for Deep Throat™ saws (Model Nos. 5 6031 0010, 5 6047 0010 and 5 6041 0010)

No. 9 2506 0220

14 TPI

 Cuts material 1/8" - 1/4" thick

44-7/8" L x 1/2" W x .025" T

No. 9 2506 0230

10/14 TPI*

Cuts material 3/16 " - 1/2" thick

44-7/8" L x 1/2" W x .025" T

No. 9 2506 0240

8/12 TPI*

 Cuts material 3/16 " - 1/2" thick

44-7/8" L x 1/2" W x .025" T

No. 9 2506 0200

 8 TPI

Cuts material 1/2" and thicker

44-7/8" L x 1/2" W x .025" T

* Variable tooth pitch (10/14 TPI and 8/12 TPI) saw blades cut faster and last longer than standard pitch blades.
* Varying tooth size and gullet depth reduce harmonic vibration for quieter, more efficient cutting.

 

Vise Clamp for Accurate Cuts

Securely clamp to round, square and angular materials for straight cutting

Easily attach to CS Unitec Portable Band Saws, model numbers:
5 6031 0010
5 6041 0010
5 6047 0010

Model No. 5 6031 9400
Clamp-on vise for 7" Deep Throat™ Band Saws
Maximum material size – rounds: 7"; squares: 5"; angles: 5"

Shown at right: Model 5 6031 9400 with Band Saw

 

 Band Saw vise clamp for straight cutting

 

Return to Saws (Portable): Air & Electric

 

Clamps and Case For Reciprocating Saws

  • Pipe Clamp, 3/8" - 2" - P/N 238.449
  • Pipe Clamp, 3/8" - 4" - P/N 250.666
  • Pipe Clamp, 1/2" - 6" Steel (up to 8" Plastic) - P/N 251.259 (schematics)
  • Metal Carrying Case (For both Air and Electric "Recip" Saws) - P/N 256.503

 

Heavy Duty Reciprocating Saw Blades (5 per pack)

 Length

 Heavy-Duty, Bi Metal

 Saw Blades

 Part No.

 6"

 8 TPI

 5 / Pack

 252.329

 8"

 8 TPI

 5 / Pack

 251.620

 12"

 14 TPI

 5 / Pack

 252.167

 9-1/4"

 18 TPI

 5 / Pack

252.136

 12-3/8"

 18 TPI

 5 / Pack

 252.137

 

Return to Saws (Portable): Air & Electric

 

Replacement Chains and Accessories for Air Chain Saws

  • 10" Saw Chain, Super Chisel - P/N 5 1005 9910
  • 17" Saw Chain, Super Chisel - P/N 5 1007 9930
  • 21" Saw Chain, Super Chisel - P/N 5 1007 9935
  • 25" Saw Chain, Super Chisel - P/N 5 1007 9940
  • Carbide - Tipped 10" Saw Chain, Super Chisel - P/N 5 1005 CC10
  • Carbide - Tipped 17" Saw Chain, Super Chisel - P/N 5 1005 CC20
  • Carbide - Tipped 21" Saw Chain, Super Chisel - P/N 5 1005 CC40
  • Carbide - Tipped 25" Saw Chain, Super Chisel - P/N 5 1005 CC60

 

Cut-Off Saw Accessories: Air

  • Diamond Blade (wet-cut) 1" arbor - P/N CS-50-14"

 

Return to Saws (Portable): Air & Electric

Core Drilling Machines, Hand-Held & Rig Mounted

 portable water tank

 vacuum pump

Portable Water Tank 

Vacuum Pump No. 253.511 

Core Drilling Accessories & Spares

  • Metal Carrying Case for hand - held core drills - P/N 251.590
  • Centering Aid for hand - held core drills - P/N 255.011
  • Centering Aid w/ Suction Cup for Mini Diamond Drill (END 712 P) - P/N 3583A
  • Centering Aid w/ Handle for Mini Diamond Drill (END 712 P) - P/N 3583B
  • Electric Vacuum Pump with fittings for BD-04, 110 Volt - P/N 253.511
  • Pneumatic Vacuum Pump with fittings for BD-04 - P/N 253.542
  • Water Collection Ring Kit w/ Centering Aid, rings, gaskets, hose and adaptor - P/N 255.036
  • Anchor Stand, BD-04, (Motor mount not included) - P/N 256.955 (schematics)
  • Combo Anchor / Vacuum Stand - P/N 256.970
  • Motor Mount for BD-04, fits: Core Drills BHW 2111 and BHW 2121 - P/N 256.971
  • Motor Mount for BD-04, fits: Core Drills BHW 2113, 2 1313 0010 & 2 1315 0010 - P/N 256.972
  • 1-1/4" x 7 UNC Adapter - P/N 258.991
  • 5/8" x 11 UNC Adapter - P/N 258.992
  • Portable Water Tank, 3.5 gal. capacity - P/N 251.622
  • Water Pressure Tank, 3 gal. (plasic) for END 712 P Mini Diamond Drill - P/N 251.623

 

Unicore Diamond Core Bits for Wet Core Drilling

  • Premium Level Quality for concrete and steel reinforcement.
  • Laser Welded Segments.
  • Standard Bit length, 14" - Special length available upon request.
  • Standard Drilling Depth, 12" (6" and 12" spindle extensions available).
  • Diameter Size Ranges from 1/2" to 24".
  • Thread Connection: 1/2" to 1-1/2" diameter = 5/8 "- 11 Female. 1-5/8" and larger = 1-1/4" - 7 Female Thread.

 

Return to Core Drillng Machines, Hand-Held & Rigs

 

Dust Extraction Power Tools and Vacuum System Accessories

 

Tuck Pointing & Concrete Grinding

  • Diamond Blade, 4 1/2" x .250 (for joint cutter F 1509 FR - P/N 252.281
  • Diamond Blade, 5" x .080 (for joint cutter M 1509 FR or F 1509 FR) - PN 252.290
  • Diamond Grinding Wheel, 5" (for concrete Grinder LD 1509 FR) - P/N 253.115
  • Diamond Grinding Wheel, 7" (for concrete Grinder LD 2106 VC) - P/N 253.117
  • Diamond Blade, 9" x .080" (for cut-off saw A20/4) - P/N 255.753
  • Metal Carrying Case (for A20/4 and A20/4 D) - P/N 492.058

 

Vacuum / Dust Extractor

  • CS 34 K Filter Bags, 5 pack - P/N 252.222
  • CS 34 K Stepped Adaptor (for hose connection to vacuum port on power tools) - P/N 5.453-016
  • CS 34 K Filter Cassette - P/N 5.731-053
  • KS 45 Wet Filter Bags - P/N 258.500

 

Grinders / Sander / Drill Accessories for Dust Extraction

  • Dust Extraction Guard,4 - 1/2" semi enclosure, 1 - 7/8" ID flange, nylon brush collar - P/N 251.682
  • Dust Extraction Guard, 5" full enclosure, 1 - 7/8" ID flange - P/N 252.717
  • Dust Extraction Set, 4 -41/2", includes 252.682, bronze brush collar, cable clips and accessories - P/N 253.355
  • Drill Dust Collection Kit, 5/8" capacity - P/N 2.637-402

    Return to Dust Extraction Power Tools &Vacuum Systems

 

Portable Magnetic Drilling Machines & Unibroach Annular Cutters

 

Unibroach Annular Cutters

  • Unibroach Annular Cutters are for use with magnetic drilling machines with 3/4" arbor collets.
  • Unibroach Cutters are made of M42 steel (8% Cobalt) which is much tougher than the M2 High Speed Steel used for conventional cutters.
  • Standard sizes 7/16" to 2-1/16" diameter and 1", 2" or 3" depth.
  • M42 metal and lower tooth load extend tool life before resharpening.
  • Easier, more efficient cutting of tough to cut metals, such as stainless steel.
  • Special sizes available upon request.

 

Pilots, Arbors, Countersinks and Chuck Adaptors

  • Pilot, 7/16", 1" - depth cutter: 7-3-101
  • Pilot, 1" - depth cutter: 7-3-102
  • Pilot, 7/16", 2" - depth cutter: 7-3-201
  • Pilot, 2" - depth cutters: 7-3-202
  • Pilot, 3" - depth cutters: 7-3-302
  • No. 2 Morse Taper Arbor: 7-3-902
  • No. 3 Morse Taper Arbor: 7-3-903
  • No. 4 Morse Taper Arbor: 7-3-904
  • Countersink, up to 2" hole: 7-3-910
  • 1/2" Chuck Adaptor for twist drills (fits AB-4300 and "UB" series.) - PN 100.054
  • 5/8" Chuck with #3 Morse Taper, for UB 3200. - P/N 100.062

 

Return to Unibroach Annular Cutters

 

Sanding, Polishing, Grinding and Surface Finishing Tools

 

Abrasives for the Electric and Pneumatic Finishing Machines

(Models LP 1503 VR and LP 1503 Air)

Flap Wheels - ( Mop Grinders ) aluminum oxide - For surface structuring and polishing. Removes scratches, rust, old paint layers, scales and burrs. Wheel Width - 2", Normal Requirement: 2 Wheels.
Grit Sizes; 24,40,50,60,80,100,120,180,240,280,360

Fleece Grinders - Polishing Wheel (non-woven nylon) - Creates striking surfaces in high grade steel, copper, aluminum, brass, etc. Cleans layers of oxidation. Smoothes plastics & wood. Wheel Width - 2" or 4 ", Normal Requirement: Two 2" wheels or one 4" wheel.
Grit Sizes; 80,180,280,400,600

Fleece Mop Grinders - (inter-leaf) - Aluminum oxide between non-woven abrasive flap wheel. Good for dull finishing & glazing. Removes small scratches in metal, hard plastics and wood. #3 and /or #4 finish in stainless steel. Wheel Width - 2" or 4 ", Normal Requirement: Two 2" wheels or one 4" wheel.
Grit Sizes; 80, 180

Precision Grinding Roller - Soft rubber polishing wheel interspersed with abrasive grains. For highly brilliant longitudinal structures. Best results on high grade stainless steel. Wheel Width - 2" or 4 ", Normal Requirement: Two 2" wheels or one 4" wheel.
Grit Sizes; 60,180

Cotton Buffer Ring - Polishes aluminum, copper, brass and stainless (VA) steel. Use with buffing compound or paste. Normal Requirement 8

Felt Polishing Wheel - Polishes aluminum, copper, brass and stainless (VA) steel). Use with buffing compound or paste. Wheel Width: 2", Normal Requirement: 2 wheels

Buffing Compounds - For Stainless Steel, Aluminum, and Brass

Pneumatic Wheel - Inflatable soft rubber drum. Air cushion contours to the workpiece. For use with abrasive grinding belts and non-woven polishing belts listed below Size: 3-1/2" W x 3-3/4"L.

(Model No. LB 1506 VR)

Abrasive Grinding Belts - / Alumina - Zirconia and Aluminum Oxide for Pneumatic Wheel.
Grit Sizes; 40,60,80,100,120,180,240,400

Abrasive Polishing Belt (non-woven) - For polishing, finishing and cleaning Size 3-3/4" x 11-7/8" . For use with Pneumatic Wheel 256 283. 3 belts per pack.
Grit Sizes; Course, Medium, Fine

Nylon Brush ( Silicone Carbide impregnated ) - Good for deburring, cleaning, roughening, smoothing, etc. Wheel Width: 2-1/2" Normal Requirement: 1

Stainless Steel (va) wire brush - Deburrs, roughens, removes, rust & paint. Wheel Width: 2-1/2" Normal Requirement: 1

Wire Strand Brush - Removes rust, deburrs, takes away dirt & old paint Wheel Width: 2-3/4" Normal Requirement: 1

Drive Roll - Drives Polishing / Grinding Belts - listed below For use on railings and pipe to clean, remove rust & scales, finishing and polishing.

Polishing Belt (non- woven) - For cleaning. finishing and final polishing. 3 belts per pack. For use with drive roll.
Grit Sizes; Medium Fine

Grinding Belt - For cleaning, finishing & preliminary polishing 10 belts per pack. For use with Drive Roll.
Grit Sizes; 40,120,240

Abrasive Grinding Belt - Alumina - Zirconia, for Grinding & Surface Structuring. Size 24-7/16" x 1-5/8". Pack of 3.
Grit Sizes; 36,60,120,180

Abrasive Polishing Belt (non-woven) - For Polishing and cleaning. Size 24-7/16" x 1-5/8". Pack of 3
Grit Sizes; Course, Medium, Fine

(Model No. ST 110 VE)

Finishing Pads (non-woven) - Aluminum Oxide Dim.: 1-1/2 " x 2-1/4"L. Pack of 10
Grit Sizes; 60,120,180

 

Return to Sanding, Polishing, Grinding and Surface Finishing Tools