AIRBOR™ AB-4300 Portable Pneumatic Magnetic Drill

Pneumatic power for hazardous environments - ATEX approved for ex zones

  • AIRBOR™ AB-4300 Pneumatic Powered Portable Magnetic Drill
  • AIRBOR™ AB-4300 Pneumatic Drill with annular cutter and rack down
  • AIRBOR™ AB-4300 Pneumatic Drill with annular cutter and rack up
  • AIRBOR™ Portable Pneumatic Magnetic Drill
  • AIRBOR™ AB-4300 Pneumatic Drill with twist drill and rack up
  • AIRBOR™ AB-4300 Pneumatic Powered Portable Magnetic Drill
  • AIRBOR™ AB-4300 Pneumatic Drill with annular cutter and rack down
  • AIRBOR™ AB-4300 Pneumatic Drill with annular cutter and rack up
  • AIRBOR™ Portable Pneumatic Magnetic Drill
  • AIRBOR™ AB-4300 Pneumatic Drill with twist drill and rack up
atex certified air reciprocating saw

Inherently safer than electromagnetic drills in hazardous atmospheres and wet environments where electricity requires "hot work permits," CS Unitec's portable air-powered magnetic drill is ATEX certified for Ex zones.
 

Motor and magnet are powered completely by compressed air.

Pneumatic power for hazardous environments – holes up to 2-1/16" dia.

Safe & Reliable

• ATEX certified
• Industry's first completely air-operated magnetic drill – no electricity!
• Fail-safe permanent magnet is activated "on" and "off" by air pressure; in the event of a loss of air flow, the magnet will not disengage
• 1600 lbs. magnet holding strength

Drill up to 2-1/16" dia.

• Uses annular cutters
• Twist drilling up to 5/8" dia.
• Powerful 1.6 HP drill motor
• Long drill stroke - up to 10-1/4"
• Pressurized coolant system lubricates cutter and reduces risk of sparking

Model Comparision

AB-4300-2R AB-4300-2
Drill Stroke
w/cutters
10-1/4"
w/chuck
7-1/2"
w/cutters
 4-7/8"  
w/chuck
1-3/4"
Height
closed
13-1/2"
open
22"
closed
13-1/2"
open
17-1/2"
Weight
lbs.
43
kg
20
lbs.
38
kg
18
  • Overview
  • AB-4300-2 Specs
  • AB-4300-2R Specs
  • Options
Cutter
Capacity
Twist Drill
Stroke
(length)
Speed
Ø 2-1/16" Ø 5/8" Up to 10-1/4" 400 RPM

Motor Power (Pneumatic) 1.6HP
Air Consumption @ 90 PSI 64 CFM

(1/2" NPT Air Connection)
Hole Capacity 2-1/16" dia. 
Stroke Length with Cutters 4-7/8"
Stroke Length with Twist Drill 1-3/4"
No Load Speed 400 RPM
Magnet Base Size 8-3/4" W x 3-1/2" L
Dimensions 13-1/2" H x 12-1/2" L x 4-3/4" W
Height - Closed 13-1/2"
Height - Open 17-1/2"
Magnetic Force (1" Plate) 1600 lbs. 
Arbor Bore 3/4" Weldon Shank
Weight 38 lbs. (18kg)
Automatic Lubrication Included

Motor Power (Pneumatic) 1.6HP
Air Consumption @ 90 PSI 64 CFM

(1/2" NPT Air Connection)
Hole Capacity 2-1/16" dia. 
Stroke Length with Cutters 10-1/4"
Stroke Length with Twist Drill 7-1/2"
No Load Speed 400 RPM
Magnet Base Size 8-3/4" W x 3-1/2" L
Dimensions 13-1/2" H x 12-1/2" L x 4-3/4" W
Height - Closed 13-1/2"
Height - Open 22"
Magnetic Force (1" Plate) 1600 lbs. 
Arbor Bore 3/4" Weldon Shank
Weight 43 lbs. (20kg)
Automatic Lubrication Included

With a geared chuck adapter (Part No. IBC 18) and extra rack (Model No. AB-4300-2R), AIRBOR™ easily converts to a standard drill press with a 7-1/2" stroke. Pressurized lubrication system (Part No. 9 4002 0020). AB-4300-2R shown with extra rack up (left) and extra rack down (right).
ab 4300 drillpress
Pressurized lubrication system
airbor ab 4300 rack up and down