Pneumatic Drills and Drive Units

High-torque reversible pneumatic drilling and tapping machines

Morse Taper Drills w/ Feed Spindle
Model 2 2089 0030
with reverse and safety twist throttle

High-torque reversible drilling, tapping and threading machines
Ideal for drilling, reaming, tube rolling, tube expanding and tapping
Use for special applications including mills, spindles, slides, controllers, pipe tapping, valve turning and more
Drill chucks and Morse Taper arbors
Hammer drills for drilling concrete with up to 2200 blows per minute
Special OEM air motors available on request
One-year warranty
Click here for rotary hammer drills


D-handle Drills Model 2 1310 0010	Pneumatic Hammer Drills Model 2 1266 0010	Pneumatic Pistol Drills Model 2 1261 0010

Model No.	Motor Power (HP)	Load Speed (RPM)	Reversible	Chuck/ Arbor	Drilling Cap. in Steel	Tube Rolling Cap.	Torque Output (ft./lbs)	CFM at 90 PSI	Length	Feed Length	Weight (lbs.)
Pistol Drills
2 1261 0010	0.7	850	NO	1/2" Chuck	1/2"	N/A	7 max.	21	9-3/4"	N/A	4.6
2 1260 0010	0.7	1550	NO	3/8" Chuck	3/8"	N/A	6 max.	21	9-1/4"	N/A	4.6
Hammer Drills (for concrete and underwater applications)
2 1266 0010	0.75	950	NO	1/2" Chuck	1/2"	N/A	7 max.	21	12"	N/A	6.7
D-handle Drills
2 1310 0010	0.8	650	NO	1/2" Chuck	1/2"	N/A	8 max.	24	12-1/2"	N/A	12
2 1311 0010 Schematics (PDF)	0.8	650	NO	MT1	5/8"	N/A	8 max.	24	11"	N/A	12
Morse Taper Drills w/ Feed Spindle*
2 2089*	1.7	250	YES	MT3	1-1/4"	1"	36 max.	24	26-1/2"	1-5/8"	28
2 2506*	2.5	220	YES	MT3	1-1/4"	2"	63 max.	70	26-1/2"	2-1/2"	32
2 2502*	2.5	80	YES	MT4	2"	2-1/2"	173 max.	70	26-1/2"	2-1/2"	37

* The last four digits of the More Taper Drill Model No. identify the type of throttle. Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Throttle.

Model 2 2502 0010 Schematics (PDF)

Model 2 2502 0030 Schematics (PDF)