SDS Max Drill Bits, Chisels and Core Bits

Specially designed and manufactured to use in our 2" Pneumatic Rotary Hammer Drills and our 2" Hydraulic Rotary Hammer Drills.
These carbide-tipped hammer drill bits, chisels and core bits will provide maximum performance and extended life providing a lower cost per job.

Download PDF of SDS Max Drill Bits, Chisels and Core Bits.

 

CARBIDE-TIPPED SDS MAX BITS
Carbide-tipped SDS Max Bits provide long service life when drilling through concrete and masonry.
Order
Number

Bit Diameter
Usable Length
Overall
Length
MP 240
1"
8"
13-1/4"
MP 435
1"
11-1/2"
17"
MP 495
1-1/8"
11-1/2"
17"
MP 540
1-1/4"
11-1/2"
17"
MP 600
1-3/8"
11-1/2"
17"
MP 690
1-1/2"
11-1/2"
17"
MP 510
1-1/8"
17"
22-1/2"
MP 555
1-1/4"
17"
22-1/2"
MP 650
1-3/8"
17"
22-1/2"
MP 705
1-1/2"
17"
22-1/2"
MP 525
1-1/8"
30-3/4"
36-1/4"
MP 630
1-3/8"
30-3/4"
36-1/4"

SDS MAX CHISELS
High-reliability for continuous, heavy-duty use.
Order
Number

Type
Width
Length
Flat Chisels are ideal for a wide variety of chiseling applications in brick, concrete and stone.
CS 5801
Flat Chisel
1"
12"
CS 5803
Flat Chisel
1"
18"
Moil Point Chisels are ideal for breaking up concrete, brick and asphalt. Can also be used for light demolition applications and making starter holes in concrete.
CS 5805
Moil Point
-
12"
CS 5807
Moil Point
-
18"
Scaling Chisels are ideal for removing scale, rust and concrete spatter.
CS 5809
Scaling Chisel
2"
12"
CS 5811
Scaling Chisel
2"
18"
CS 5812
Scaling Chisel
3"
12"
Slotting Chisels are ideal for slotting in concrete and masonry. They also excel at joining two starter holes to create one large opening.
CS 5813
Slotting Tool
1-1/8"
12"
Seam Chisels are ideal cutting narrow channels and cleaning out old mortar between bricks and masonry prior to tuck pointing or caulking.
CS 5815
Seam Tool
1-1/8"
12"
Clay Spade Chisels are ideal for digging clay, dirt, hard-packed gravel, shale and more.
CS 5816
Clay Spade
4-1/2"
15-1/2"
Ground Rod Drivers are ideal for driving electrical grounding rods into earth.
CS 5817
Ground Rod Driver
-
10-1/2"
Bushing Tools are ideal for preparing the concrete surface for finishing. Also removes concrete surface for a rough exterior finish.
CS 5818
Bushing Tool
-
9-1/2"
CS 5818 CB
Carbide Tip Bush Tool
-
9-1/2"
Asphalt Cutters are ideal for cutting asphalt or hard ground.
CS 5820
Asphalt Cutter
3-1/2"
15-1/2"
Floor Scrapers are ideal for removing ceramic and vinyl floor tile without damaging concrete.
CS 5822
Floor Scraper
6"
25"

 

SDS Max Core Bits
Pilot Drill eliminates need for knockout and taper holes, placing less stress on the Core Bit Adapter.
Order
Number

Description/Bit Diameter
Overall
Length
PAT-SMAX
SDS Max Core Bit Adapter
PC-9888
1"
6"
PC-9999
1-1/8"
6"
PC-9100
1-1/4"
6"
PC-9110
1-1/2"
6"
PC-9120
1-3/4"
6"
PC-9130
2"
6"
PC-9140
2-1/2"
6"
PC-9145
2-3/4"
6"
PC-9150
3"
6"
PC-9160
3-1/2"
6"
PC-9170
4"
6"
PC-9172

4-1/2"
6"
PC-9173
5"
6"
PC-9174
6"
6"
PC-9200
Pilot Drill for 1-1/2" - 6" Core Bits
PDE-6
6" OAL Core Bit Extension
PDE-12
12" OAL Core Bit Extension
T-750
Threaded Coupler for All Core Bits
NOTE: Core Bits require 3 pieces: The Core Bit Adapter (or shank), the Core Bit Body and the Pilot Drill. The Threaded Coupler is supplied with the adapter at no charge. It is listed as a replacement part should it break.

 

Email us for more information.

Contact Us




All Fields Required

We respect your privacy. The information you provide to CS Unitec, Inc. will not be rented, sold or shared with a third party.