Accessories Portable
Magnetic Drills
|
Pilot
Pins for Cutters
• Milled
channel efficiently supplies internal lubrication to cutting teeth
• Available
for cutter diameters ranging from 7/16" to 5" and 1", 2", 3" and
4" depth of cut
• See
price list for part numbers |
|
|
Drill
Chucks for Straight Shank Twist Drills
• Three
capacities: 1/2", 5/8" and 3/4"
• Five
chucks and adapters to fit all magnetic drills:
A) IBK-17 - 1/2" chuck for ECO-32 and ECO-32T
B) IBK-18 - 1/2" chuck with 3/4" shank for AIRBOR™ (fits all drills
with 3/4" arbor bore)
C) IBK-19 - 5/8" chuck with MT2 shank for ECO-50 and ECO-50T
D) IBK-20 - 5/8" chuck with MT3 shank for ECO-80 and ECO-100/3
E) IBK-21 - 3/4" chuck with MT3 shank for ECO-80 and ECO-100/ |
Magic-Stick
Safely removes lightweight
metal waste |
Step
1: Positioning the lever handle in the forward position
magnetizes the metal chips to the stick for easy cleanup
Step
2: Sliding the lever handle back demagnetizes the
stick and releases the metal chips into a waste disposal container
Result: Safe, easy cleaning of magnetic drills, cutters and machining
centers
|
|
|
| Tapping
Tools, Tap Collets and Tapping Chucks |
• Manufactured
from high-quality HSS to ASA Standard
(or DIN 376 for metric)
• Ideal
for CS Unitec's portable drilling and tapping machine and other
drills |
Tap
collets fit magnetic drills with 3/4" arbor bore.
They are available for taps 1/4" through 3/4".
They hold standard USA taps conforming to ASA
|
Model
No. GSW.333
quick-change tapping chuck requires individual clamp collets for
each tap size. This is the least expensive system if you will
tap less than 4 sizes. GSW.333 has an MT3 connection.
Part
No. |
Size |
501693 |
9/16" |
501694 |
5/8" |
501695 |
3/4" |
501696 |
7/8" |
501697 |
1" |
|
|
Clamp collets for use in tap chuck GSW.333. Collets hold
taps from 9/16" to 1". |
|
Model
No. GSW.830
tapping chuck utilizes two variable clamp collets to tap 3/8"
to 1-1/8".
It is the least expensive system if you will tap more than 4
sizes. GSW.830 has an MT3 connection.
|
Variable
clamp collets for use in tap chuck No. GSW.830
Model No. VSP.160 variable clamp collet fits
shanks 3/8" through 5/8".
Model No. VSP.230 variable clamp collet fits
shanks 5/8" through 7/8". |
| Twist
Drills with 3/4" Weldon Shank |
• Manufactured
of high-speed steel
• Same
3/4" connection as Annular Cutters
• Bit
diameters from 1/4" to 3/8"
|
|
|
90" Countersinks
Manufactured
of HSS with 5% cobalt
3/4"
Weldon shank
Countersink
hole sizes:
SCE
40 from 3/8" to 1 1/2"
SCE 50 from 5/8" to 2 1/8" |
|
| Arbors
for Annular Cutters |
 |
|
|
|
Manual Cooling |
Automatic Cooling
|
Extended Length
|
Quick-Lock
Cutter Arbor with Automatic Cooling
Quick-Lock
cutter arbors allow fast, no-tools changeover for 3/4" dia. shank
cutters.
IMC.2Q - Morse Taper No. 2
IMC.2Q
Schematics (PDF)
IMC.3Q - Morse Taper No. 3
IMC.3Q Schematics (PDF) |
• Can
be used on any magnetic drill stand, drill press or shop equipment
with a Morse Taper intake of No. 2, No. 3 or No. 4
• Available
for Annular Cutter shank sizes of 3/4" or 1-1/4" Weldon
• Available
for automatic internal cooling or manual cooling
MC.2 - Morse Taper No. 2 with 3/4"
arbor bore, manual cooling
MC.3 - Morse Taper No. 3 with 3/4" arbor bore, manual cooling
MC.4 - Morse Taper No. 4 with 3/4" arbor bore, manual cooling
IMC.20 - Morse Taper No. 2 with 3/4"
arbor bore, automatic cooling
IMC.30 - Morse Taper No. 3 with 3/4" arbor bore, automatic cooling
IMC.30/32 - Morse Taper No. 3 with 1-1/4" arbor bore, automatic cooling
|
Extensions
for Annular Cutters
Extra-long
holders extend stroke of drills |
• Extend
cutter reach up to 12"
• Available
for magnetic drills with 3/4" arbor bore or MT3
• Also
available with 3 flats for straight shank drill chucks and R8
shanks for drill presses
• Drill
difficult-to-reach areas
• Extend
cutter reach over the side or through an existing hole*
* Hole
diameter must be larger than 1 5/16" to accommodate width of extension
|
|
Pipe
Clamp Saddle System
Ensures
safe, secure drilling of pipes and tubular material |
• Quick-clamping
feature for fast setup on pipes up to 20" dia.
• For
use on steel, stainless steel and other materials
• Chain
tensioner secures saddle to pipe in any position, while four independent
steel feet automatically adjust to pipe contour
Larger
sizes available with optional extension chain
|
|
|
Cutting
Fluids and Pastes for Cooling and Lubrication
Ease the burden and extend
the life of cutting tools
|
|
Cutting
Oil [Part No. IBO.20Q (quart); IBO.20G (gallon)]
• High-alloy
cutting oil for heavy removal of metal, including stainless steel
• Chlorine-free
(MSDS on bottle)
• Not
necessary to dilute with water
Water-soluble Emulsion [Part No. MV.4Q (quart);
MV.4G (gallon)]
• 1:20
water-dilutable oil emulsion
• Economical
to use
• Ideal
for automatic cooling/lubrication systems
|
|
Cutting
Pastes [Part No. IBP.50/2]
• Use
for horizontal or inverted drilling applications
• Heavy-duty
paste is ideal for difficult drilling of high-alloy steels such
as stainless
• Suitable
for all removals, clearances, calibration, tapping and punching |
|
