The magnetic force of your magnet depends on a number of factors:
• Thickness of material being drilled
• Coatings or paint layers on material
• Chips, dirt or grease between the magnet and the material
 |
The SENSORTEC System measures whether the magnet has sufficient adhesive force on the material. An LED indicator on the switch panel warns you of insufficient magnetic force (Red Light) or if the correct force is present (Green Light).
EXTRA SAFETY |
 |
 |
| High-density (HD) dual-coil magnets are wound in two circles to increase the surface area and density of the magnetic field. The higher density increases the magnetic force by over 100% as compared to a single rectangular coil commonly used in electromagnetic drills. |
| TEMPTEC Electromagnets ensure that the magnet does not overheat. When the magnet is switched on for long periods of time, the coils could overheat or even burn out. The TEMPTEC feature ensures that the power of the magnets is reduced when the drill motor is not active. Therefore, it won't build up heat. |
LONGER SERVICE LIFE |
|
 |
Keyless arbor allows easy, no-tools changeover of Annular Cutters. No more searching for allen keys or set screws — just twist and lock. Included on ECO-50, ECO-80 and ECO-100 series drills. |
ARMOR-PLATED™ TiAlN Cutters are ideal for all drilling applications. A high surface hardness and greater lubricity allow drilling at high operating temperatures with more power and speed. |
|
|
 |
Many drills are offered with forward and reverse capabilities, allowing drilling and tapping with one unit.
High-torque motors are double insulated to increase operator safety. |
Variable-speed dial on some models lets the operator adjust speed to match cutter diameter to correct RPM. This provides increased tool life and reduces cutter breakage. |
|
|
 |
Optional Power Assist provides delayed torque transfer, decreasing the load on both the cutter and machine. This allows the machine to maintain maximum RPM under full load. Click here for more information. |
Some Pneumatic tools are ATEX Approved for use in hazardous and potentially explosive atmospheres. |
|
 |
Email
us for more information. |
