Concrete Grinders
5" Lightweight with Dust Extraction - 11 AMP
5" Heavy-duty with Dust Extraction - 14 AMP
5" Heavy-duty with Dust Extraction - 16 AMP
7" Heavy-duty Walk-Behind with Dust Extraction - 22 AMP
|
5" Heavy-Duty Concrete
Grinder, with dust extraction
Side
handles and extra power
- Remove
paint, epoxy, glue and other hard coatings
- Smooth
rough surfaces
- Clean
concrete before applying new paint or coatings
- Collect
dust for clean working area with CS 1225 dust extraction
vacuum
The
EBS 125 Concrete Grinder is held by two side handles.
This ergonomic “H” design differs from traditional
right angle grinders and allows the operator to finish
larger surfaces with less fatigue. Additionally, the
motor is set above the grinding wheel in a dust-free
zone, resulting in longer tool life.
 A
brush shield protects against dust and enables adjustment
of the working height to the wear of the diamond grinding
wheel. Also, the EBS 125 has a removable front dust guard
for finishing concrete floors into the corners and edges.
This allows grinding right up to the wall (see below).
An
optional walk-behind cart (P/N 37210, shown at right)
allows for comfortable operation of the EBS 125 Concrete
Grinder. The perfect addition to virtually dust-free
grinding when used with the CS 1225 vacuum (see left).
Model EBS 125 D includes one premium Diamond wheel (P/N
253.115).
Standard
Equipment includes:
Spanner wrench, open-ended wrench and metal carrying case. |
|
Advantages
Model
No.'s:
EBS
125 Machine
EBS 125D Machine
with 5" Thermo
-Jet Diamond Wheel
EBS 125.1
RO Machine
with variable speed
EBS 125.1
ROD Machine
with variable speed
and 5" Thermo-
Jet Tungsten Carbide
37210 Walk-behind
Cart |
|
|
|
|
Diamond
Grinder Wheels
5" diameter with 7/8" arbor
 
 
See
Accessories
Email
us for more information |
Grinding
Wheel Accessories for Concrete Grinder
5" Thermo-Jet
Diamond Wheel Model:
Model: for thermoplastics & hard coatings (color: red) For
finishing Poroton and slate as well as removing of adhesives remnants
and protective paints and high build coatings as well as for finishing.
Order No: 253.115
5" Thermo-Jet
Diamond Wheel Model:
Model: for concrete (color: gold) For finishing and facing
concrete, brick, lime-sand-stone, basalt, sandstone
Order No: 253.115 C
5" Thermo-Jet
Diamond Wheel Model:
Model: For screed & new concrete (color: yellow) For
finishing new and green concrete, screed, lime mortar & plaster,
cement, mortar, soft limestone
Order No: 371.030
5" Thermo-Jet
Carbide Wheel Model G:
Model: Tungsten carbide grit disc (color: copper) For leveling
and reducing plaster, lime-sand-stone and roughening wood; also
removing of old paint
Order No: 371.060 |
Lightweight
Concrete Grinder, 5" with Dust Collection
Removes epoxy,
paint, mastic, mud and other coatings from concrete surfaces.
Virtually dust free working conditions when used in combination
with an industrial vacuum cleaner. Because the concrete pores
don't clog you can remove the old coating and prepare the concrete
for the new layer. No rasping, no jumping. Whether its coating
removal, edge work, planing or other surface prepartion this machine
gets the job done.
- Powerful
11 Amp motor with overload protection and soft start.
- Electronic
speed control for constant RPM under differing load.
- Vacuum
hood for effecient dust collection
- Spindle
locking device
- 5/8" spindle
/ 7/8" arbor
- Weight:
6 lbs.
| STANDARD
EQUIPMENT |
| Retaining
wrench (E) |
------- |
| Clamping
nut (E) |
100.080 |
| Clamping
flange (E) |
191.612 (SW 14) |
| Guard
(E) |
254.213 |
| Loop
handle (E) |
236.934 |
| 3
cable clips (E) |
252.188 |
| Hose
clip (E) |
252.050 |
| Vacuum
ring
|
257.246 |
| Hex
wrench, 6 mm (E) |
102.229
(SW 4) |
| Wrench
box (E) |
233.943 |
| 1
metal carrying case (Z) |
252.185 |
| 1
face wrench (E) |
107.492 |
5" Thermo-Jet
Diamond Wheel ideal for removing epoxy, glue, mastic and other
coatings.
Part
No. 253.115 |
Model
No.'s:
LD1509FR
(Machine)
LD1509FRD
(Machine with 5" Thermo-Jet Diamond Wheel)
See
Accessories
Email
us for more information
|
|
Concrete
Grinder 5"
 |
Removable front dust guard for grinding up to walls and edges. |
|
5" Heavy-Duty Concrete
Grinder, with dust extraction
16 AMP - The most powerful in its class!
- Remove epoxy, glue, paint and other hard coatings
- Smooth rough surfaces or clean concrete before
applying new paint or coatings
- Powerful 16 AMP motor with high load capacity
- Collect dust for clean working area with CS Unitec's CS 1225 or CS 1500 dust extraction vacuum
The EBS 1801 Concrete Grinder removes paint, epoxy, glue and other hard coatings. It can be used to prepare rough concrete and floors for application of new epoxy and/or coatings. This grinder is solidly built with a 16 AMP motor to enable a high load capacity. The EBS 1801 Concrete Grinder is especially suited for hard jobs, such as the grinding of two component adhesives.
- High-performance motor is located above the diamond grinding wheel, away from dust, to extend the life of the grinder
- Brush shield allows the user to adjust the height of the grinder to the wear of the diamond wheel and protect against dust
and debris
- Electronic features include soft start, overcurrent cut-off and optical overload indication
- Front edge of the dust guard is removable
to allow grinding right up to the wall
- Optional walk-behind cart is available
to eliminate kneeling or bending while
grinding and to provide more comfort to
the user (P/N 37210)
- Collect dust for clean working area with
CS 1225 and CS 1500 wet/dry vacuums
|
Standard Equipment includes:
Diamond Grinding Wheel and metal carrying case
Accessories:
P/N 253.115 –
5" Diamond Grinding Wheel for epoxy,
thermoplastics, paint, adhesives and hard coatings
P/N 253.115 C –
5" Diamond Grinding Wheel for finishing clear
concrete, green concrete, mortar and masonry
P/N 37210 –
Walk-behind cart |
|
Concrete
Grinder 7 "
|
7" Heavy-Duty Concrete
Grinder, with dust extraction
16 AMP - The most powerful in its class!
- Fast removal of epoxy, glue, paint and other hard coatings
- Smooth rough surfaces or clean concrete before applying
new paint or coatings
- Walk-behind operation is comfortable for operator when
working on large areas – eliminates kneeling and bending
- Powerful 22 AMP motor with high load capacity
- Collect dust for clean working area with CS Unitec's
CS 1225 or CS 1500 dust extraction vacuum
 The 7" EBS 180 walk-behind Concrete Floor Grinder prepares rough concrete and floors for the application of new epoxy and/or coatings. It can be used to remove epoxy, glue, paint and other hard coatings. The EBS 180 Concrete Floor Grinder weighs only 21 lbs. It makes finishing large areas easy by eliminating kneeling and bending, thus increasing user comfort.
- High-performance motor is located above the diamond wheel,
away from dust and debris, to extend the lifetime of the grinder
- Brush shield allows the user to adjust the height of the grinder
to protect the unit from surface dust, dirt and stones
- Electronic features include soft start, temperature control, overcurrent cut-off and constant speed
- Collect dust for clean working area with CS 1225 and CS 1500 wet/dry vacuums
|
Standard Equipment includes:
7" Diamond Grinding Wheel
Accessories:
P/N 253.117 –
7" Diamond Grinding Wheel for epoxy, adhesives, paint and hard coatings
P/N 37112 –
7" Diamond Grinding Wheel for clear (uncoated) concrete |
|
|
