Unibroach® Annular Cutters – 9-Series TCT Hornet

Unibroach Annular Cutters - 9-Series TCT Hornet - Tungsten Carbide-tipped

Tungsten carbide-tipped for high-speed cutting

Tungsten Carbide-tipped Annular Cutters
  • Use high-speed RPM for best results and faster holemaking
  • Ideal for drilling steel with rust or paint
  • Will outlast High-speed Steel (HSS) cutters
  • Leaves a burr-free finished hole
  • Available in all sizes (fractional and metric)
  • 3/4" or 1-1/4" shank

TCT Hornet cutters are available in the following sizes:

1-3/8" drill depth – ø 5/8" to ø 2"
2-3/8" drill depth – ø 11/16" to ø 5-1/8"
3" drill depth – ø 13/16" to ø 5-1/8"

Metric cutters available on request

These cutters can not be used with MAB 150.

Unibroach™ Annular Cutters – 9-Series Hornet TCT Carbide
1-3/8" Depth   2-3/8" Depth   3" Depth
Order No. Diameter Order No. Diameter   Order No. Diameter
9-1-120 C 5/8"   N/A   N/A  
9-1-122 C 11/16"   9-1-222 C 11/16"   N/A  
9-1-124 C 3/4"   9-1-224 C 3/4"   N/A  
9-1-126 C 13/16"   9-1-226 C 13/16"   9-1-326 C 13/16"
9-1-128 C 7/8"   9-1-228 C 7/8"   9-1-328 C 7/8"
9-1-130 C 15/16"   9-1-230 C 15/16"   9-1-330 C 15/16"
9-1-132 C 1"   9-1-232 C 1"   9-1-332 C 1"
9-1-134 C 1-1/16"   9-1-234 C 1-1/16"   9-1-334 C 1-1/16"
9-1-136 C 1-1/8"   9-1-236 C 1-1/8"   9-1-336 C 1-1/8"
9-1-138 C 1-3/16"   9-1-238 C 1-3/16"   9-1-338 C 1-3/16"
9-1-140 C 1-1/4"   9-1-240 C 1-1/4"   9-1-340 C 1-1/4"
9-1-142 C 1-5/16"   9-1-242 C 1-5/16"   9-1-342 C 1-5/16"
9-1-144 C 1-3/8"   9-1-244 C 1-3/8"   9-1-344 C 1-3/8"
9-1-146 C 1-7/16"   9-1-246 C 1-7/16"   9-1-346 C 1-7/16"
9-1-148 C 1-1/2"   9-1-248 C 1-1/2"   9-1-348 C 1-1/2"
9-1-150 C 1-9/16"   9-1-250 C 1-9/16"   9-1-350 C 1-9/16"
9-1-152 C 1-5/8"   9-1-252 C 1-5/8"   9-1-352 C 1-5/8"
9-1-154 C 1-11/16"   9-1-254 C 1-11/16"   9-1-354 C 1-11/16"
9-1-156 C 1-3/4"   9-1-256 C 1-3/4"   9-1-356 C 1-3/4"
9-1-158 C 1-13/16"   9-1-258 C 1-13/16"   9-1-358 C 1-13/16"
9-1-160 C 1-7/8"   9-1-260 C 1-7/8"   9-1-360 C 1-7/8"
9-1-162 C 1-15/16"   9-1-262 C 1-15/16"   9-1-362 C 1-15/16"
9-1-164 C 2"   9-1-264 C 2"   9-1-364 C 2"
               
  9-1-266 C 2-1/16"   9-1-366 C 2-1/16"
9-1-268 C 2-1/8"   9-1-368 C 2-1/8"
9-1-270 C 2-3/16"   9-1-370 C 2-3/16"
9-1-272 C 2-1/4"   9-1-372 C 2-1/4"
9-1-274 C 2-5/16"   9-1-374 C 2-5/16"
9-1-276 C 2-3/8"   9-1-376 C 2-3/8"
9-1-278 C 2-7/16"   9-1-378 C 2-7/16"
9-1-280 C 2-1/2"   9-1-380 C 2-1/2"
9-1-282 C 2-9/16"   9-1-382 C 2-9/16"
9-1-284 C 2-5/8"   9-1-384 C 2-5/8"
9-1-286 C 2-11/16"   9-1-386 C 2-11/16"
9-1-288 C 2-3/4"   9-1-388 C 2-3/4"
9-1-290 C 2-13/16"   9-1-390 C 2-13/16"
9-1-292 C 2-7/8"   9-1-392 C 2-7/8"
9-1-294 C 2-15/16"   9-1-394 C 2-15/16"
9-1-296 C 3"   9-1-396 C 3"
         
9-1-298 C 3-1/16"   9-1-398 C 3-1/16"
9-1-2100 C 3-1/8"   9-1-3100 C 3-1/8"
9-1-2102 C 3-3/16"   9-1-3102 C 3-3/16"
9-1-2104 C 3-1/4"   9-1-3104 C 3-1/4"
9-1-2106 C 3-5/16"   9-1-3106 C 3-5/16"
9-1-2108 C 3-3/8"   9-1-3108 C 3-3/8'
9-1-2110 C 3-7/16"   9-1-3010 C 3-7/16"
9-1-2112 C 3-1/2"   9-1-3112 C 3-1/2"
9-1-2114 C 3-9/16"   9-1-3114 C 3-9/16"
9-1-2116 C 3-5/8"   9-1-3116 C 3-5/8"
9-1-2118 C 3-11/16"   9-1-3118 C 3-11/16"
9-1-2120 C 3-3/4"   9-1-3120 C 3-3/4"
9-1-2122 C 3-13/16"   9-1-3122 C 3-13/16"
9-1-2124 C 3-7/8"   9-1-3124 C 3-7/8"
9-1-2126 C 3-15/16"   9-1-3126 C 3-15/16"
9-1-2128 C 4"   9-1-3128 C 4"
         
9-1-2130 C 4-1/16"   9-1-3130 C 4-1/16"
9-1-2132 C 4-1/8"   9-1-3132 C 4-1/8"
9-1-2134 C 4-3/16"   9-1-3134 C 4-3/16"
9-1-2136 C 4-1/4"   9-1-3136 C 4-1/4"
9-1-2138 C 4-5/16"   9-1-3138 C 4-5/16"
9-1-2140 C 4-3/8"  
9-1-2142 C 4-7/16"
9-1-2144 C 4-1/2"
9-1-2146 C 4-9/16"
9-1-2148 C 4-5/8"
9-1-2150 C 4-11/16"
9-1-2152 C 4-3/4"
9-1-2154 C 4-13/16"
9-1-2156 C 4-7/8"
9-1-2158 C 4-15/16"
9-1-2160 C 5"

Shank size:
3/4" for cutters up to 3" dia.
1-1/4" for cutters 3-1/16 to 4" dia.

Hornet Carbide Cutter Kits   Pilot Pins for 9-Series
Each hornet carbide cutter kit comes with the following:
9/16", 11/16", 13/16", 15/16", 1-1/16", pilot pin & carrying case.		   Order No. Description
Order No. Description     For 3/4" Shanks
9-1-001 C 1-3/8" depth Cutter Kit   9-3-102 C 5/8" - 2" dia., 1-3/8" depth
9-1-002 C 2-3/8" depth Cutter Kit   9-3-202 C 11/16" - 2-5/16" dia., 2-3/8" depth
      9-3-302 C 13/16" - 2" dia., 3" depth
        For 1-1/4" Shanks
      9-3-202A C 2-3/8" - 5" dia., 2-3/8" depth

** We also offer Metric Carbide cutters. Please contact us for pricing and delivery.
 

Contact Us





All Fields Required

We respect your privacy. The information you provide to CS Unitec, Inc. will not be rented, sold or shared with a third party.

View our online catalog pages for:


Downloads


Related Items


Related Reading