Magnetic Drill Clamping Devices

| MOBIL CLAMP || Drilling Stand & Vise || Vacuum Plates || Pipe Saddle Clamp System |

MOBIL CLAMP

A true advance in magnetic drilling technology: The new clamping system MOBIL CLAMP can be used to convert a magnetic drilling machine into a bench drill.

Extends applications the portable magnetic drill can handle. Ideal for parts that previously could only be drilled in the workshop - they can now be machined on site. MOBIL CLAMP makes it possible to drill, countersink, ream or tap small parts, since these can be mounted into the quick clamping device.

With the mounting of a magnetic drilling machine onto the surface of the vice and the susequent activation of the magnet, you will have a versatile, stationary drilling machine in next to no time. The magnetic drilling machine becomes a multi-purpose machine: wether large or small applications, flat or high, with the twist drill or the reamer, everything is possible. A stable support, designed for the MOBIL CLAMP clamping device, ensures the correct working height and a comfortable and reliable operation.

Powerful grip:

Jaws with step and prism for clamping of flat and round material.

Fine adjustment:

An adjustment screw accurately sets to the machining point in logintudinal adjusting

MOBIL CLAMP
Order No.	Jaw width	Quick-action clamping jaw	V-block clamping jaw
ZMC 180	4" (100mm)	3.15" (80mm) clamping width	•
ZMC 300	Base stand for clamping device

Drilling Stand and Vise for Hand Drills

Drilling Pillar

Drilling Vise

Industrial drilling pillars for commercial hand drills with 43mm chuck journal diameter. Optimum stability by cast base plate combined with a pillar top of the MAB series. Versatile usability by a drill vice with 4" (100mm) jaw width (special accessories). Screws for slots are available for additional security under higher loads (special accessories). Working stroke 9" - 17" (230mm - 425mm).

Hand Drill Devices

Drilling Pillar – Order no. ZBS 100

Vise – Order No. ZST 100
Jaw width: 4" (100mm)
Clamping range: 4" (100mm)

Accessories

Screws for T-Slots – Order No. ZTN 100

Hexagon Nut with Collar – Order No. ZSM 100

Vacuum Plates

Vacuum Plate for Channeled Plates

Vacuum Plate for Smooth Surfaces

For applications where drill alone will not adhere to surface

Vacuum Plate for Channeled Plates

Order No. ZAV 301 (vacuum plate only)

Order No. ZAV 310 (vacuum plate and vacuum pump, 110V)

Ideal for channeled plates. High-performance vacuum pump with circular oil lubrication. Clamping plate diameter: 11.8"

Vacuum Plate for Smooth Surfaces

Order No. ZAV 401 (vacuum plate only)

Order No. ZAV 410 (vacuum plate and vacuum pump, 110V)

Ideal for smooth surfaces. High-performance vacuum pump with circular oil lubrication. Clamping plates with two suction surfaces and cut-through drilling area.