Paving Breaker Chisel

Ex318F and Ex320F Series

  • Ex318F Non-Sparking, Non-Magnetic Paving Breaker Chisel
  • Ex318F Non-Sparking, Non-Magnetic Paving Breaker Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex318F Non-Sparking, Non-Magnetic Paving Breaker Chisel
  • Ex318F Non-Sparking, Non-Magnetic Paving Breaker Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty

Applications:

  • Non-sparking paving breaker chisel for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic paving breaker chisel for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant paving breaker chisel for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Ex318F - 1-1/8" Hex Shank
  • Ex320F - 1-1/4" Hex Shank
  • Alloys & Use
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex318F-75AEx318F-75B
No.Material
b
inch
l
inch
a
inch
c
inch
Wt.
lbs.
b
mm
l
mm
Wt.
kg
Ex318F-75AAluminum Bronze318-13/1612-13/1665.75754782.60
Ex318F-75BCopper Beryllium318-13/1612-13/1665.75754782.60
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex320F-75AEx320F-75B
No.Material
b
inch
l
inch
a
inch
c
inch
Wt.
lbs.
b
mm
l
mm
Wt.
kg
Ex320F-75AAluminum Bronze318-15/1612-15/1665.50754812.50
Ex320F-75BCopper Beryllium318-15/1612-15/1665.50754812.50
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance
Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance
 
Use Guidelines
Proper UseMisuse
Chisels have a cutting edge at one end for cutting,
shaping and removing metal softer than the cutting edge itself
such as cast iron, wrought iron, steel, bronze, copper, etc. and
a struck face on the opposite end.
Never use chisels for cutting or splitting stone or
concrete. Never use a dull chisel or one with a
mushroomed
head. Never use a chisel with a loose or
damaged handle.

Downloads: