Cross Peen Engineers' / Blacksmiths' Hammer

Ex1041 Series

  • Ex1041 Cross Peen Engineers' / Blacksmiths' Hammer
  • Ex1041 Cross Peen Engineers' / Blacksmiths' Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex1041 Cross Peen Engineers' / Blacksmiths' Hammer
  • Ex1041 Cross Peen Engineers' / Blacksmiths' Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty

Hammer handle appearance may vary from photos shown.

Applications:

  • Non-sparking cross peen engineers' / blacksmiths' hammer for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic cross peen engineers' / blacksmiths' hammer for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant cross peen engineers' / blacksmiths' hammer for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex1041-0100AEx1041-0100B
No.H
lbs.
H
kg
Handle Length
Ex1041-01000.220.109.75"/250mm
Ex1041-02000.440.209.75"/250mm
Ex1041-03000.660.3014"/355mm
Ex1041-05001.100.5014"/355mm
Ex1041-08001.760.8014"/355mm
Ex1041-10002.201.0014"/355mm
Ex1041-15003.311.5015"/380mm
Ex1041-20004.412.0015"/380mm
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance
Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance
 
Use Guidelines
Proper UseMisuse
The striking face is designed for general blacksmith work in striking unhardened metal. The peins are used for shaping (fullering) and bending unhardened metal.Never use a sledge to strike a hammer, sledge or maul. Never use a sledge with loose or damaged handle.

Downloads: