Adjustable End Wrench

Ex501 Series - Non-Sparking, Non-Magnetic, Corrosion Resistant

  • Ex501 Non-Sparking, Non-Magnetic Adjustable End Wrench
  • Ex501 Non-Sparking, Non-Magnetic Adjustable End Wrench Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex501 Non-Sparking, Non-Magnetic Adjustable End Wrench
  • Ex501 Non-Sparking, Non-Magnetic Adjustable End Wrench Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty

Applications:

  • Non-sparking adjustable end wrench for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic adjustable end wrench for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant adjustable end wrench for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • STANDARD SIZES
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex501-6AEx501-6B
No.Materials max
inch
l
inch
Wt.
lbs.
s max
mm
l
mm
Wt.
kg
Ex501-6AAluminum Bronze3/460.29191500.13
Ex501-6BCopper Beryllium3/460.29191500.13
Ex501-8AAluminum Bronze15/1680.62242000.28
Ex501-8BCopper Beryllium15/1680.62242000.28
Ex501-10AAluminum Bronze1-1/8101.06282500.48
Ex501-10BCopper Beryllium1-1/8101.06282500.48
Ex501-12AAluminum Bronze1-3/8121.68343000.76
Ex501-12BCopper Beryllium1-3/8121.68343000.76
Ex501-15AAluminum Bronze1-3/4153.13453751.42
Ex501-15BCopper Beryllium1-3/4153.13453751.42
Ex501-18AAluminum Bronze2-3/16186.19554502.81
Ex501-18BCopper Beryllium2-3/16186.19554502.81
Ex501-24AAluminum Bronze2-3/82410.87606004.93
Ex501-24BCopper Beryllium2-3/82410.87606004.93

 


Downloads:
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 94/9/EC for work in Zones 1, 2, 21 and 22Fulfill demand in ATEX Directive 94/9/EC for work in Zones 0, 1, 2, 20, 21 and 22
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance
Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance
 
Use Guidelines
Proper UseMisuse
Adjustable wrenches are designed to provide a wide range of
capacity in a single tool and are a convenient wrench for
service and repairmen, linemen, etc. They are not intended to
replace fixed opening wrenches for production or general
service work.
Do not use an adjustable wrench to free a "frozen" nut or
to final tighten a nut. Never pull on a loosely adjusted
wrench. Never use a hammer or extension on this wrench.