Model CSU-182LCS
Scaling Hammer with Lever Throttle
Gooseneck handle and push throttle hammers also available.

Model CSU-182LNS
Needle Scaler with Lever Throttle
Push throttle hammers also available.
Non-sparking CuBe needles (Ex308-319B) available.

Model CSU-1BLNS
Needle Scaler with Lever Throttle
Non-sparking CuBe needles (Ex308-319B) available.

Model CSU-1BLCS
Chisel Scaler with Lever Throttle

Pneumatic scalers: ideal for chipping and removing metal, stone, concrete and brick, as well as carving wood

• Use in oilfields, fabrication shops, petrochemical plants, construction sites and foundries
• Chisel scalers are general-purpose hammers for chipping stone, metal, concrete, brick and for carving wood
• Needle scalers are ideal for removing weld splatter, rust, paint and other debris from many surfaces and hard-to-reach places

Model No.	Bore	Stroke	Blows per Minute	Rec'd Hose Size	Length	Weight (lbs.)	Air Inlet Thread	CFM at 90 PSI
Scaling Hammer – Lever Throttle (takes 1/2" ir notched shank chisels)
CSU-182LCS	15/16"	1-1/16"	4000	1/4"	9"	4	1/4"	13
Needle Scaler – Lever Throttle (requires 19 needles; takes 1/2" ir notched shank chisels)
CSU-182LNS	15/16"	1-1/16"	4000	1/4"	17"	5.75	1/4"	13
Chisel Scaler – Lever Throttle (takes 1/2" c notched shank chisels)
CSU-1BLCS	1"	1-1/8"	4600	1/4"	10-1/4"	3.625	1/4"	6
Needle Scaler – Lever Throttle (requires 19 needles; takes 1/2" c notched shank chisels)
CSU-1BLNS	1"	1-1/8"	4600	1/4"	17"	6.2	1/4"	12