8" Walk-Behind Floor Scarifiers
Gas • Electric • Pneumatic - Remove rust, scale, paint, adhesives and more from steel and concrete
Additional applications:
- Keyed or grooved profiles
- Roughing concrete
Features:
- Depth control maximizes performance and extends cutter life
- Integrated vacuum connection and hold-to-run handle
- Fully adjustable handlebar for operator comfort
- Electric, pneumatic or gas power
8" cutting width for use in large areas
CS Unitec's Trelawny™ Floor Scarifiers tackle the most demanding surface preparation and material removal applications. Ideal for the removal of coatings and corrosion from steel and concrete surfaces to prepare for re-coating. Produce an ideal keyed or grooved profile on concrete for waterproofing and non-slip surface applications.
Wire Brushes are ideal for finish cleaning and polishing on steel; can be used for light concrete deposit. |
Beam Cutters are ideal for light paint/corrosion removal, with minimal damage to substrate. |
Star Cutters are ideal for the removal of mastics and rubberized coatings. |
Tungsten Carbide Tipped (TCT) Cutters are ideal for aggressive applications such as roughing concrete and heavy corrosion removal, as well as grooving roadways for non-slip surface. |
Milling Cutters are ideal for the removal of plastic road markings without penetrating the surface. |
- TFP 200 Gas
- TFP 200 Electric
- TFP 200 Pneumatic
- Accessories
- Videos
Production Rate – 300 sq. ft./hour Cutter life – 10,500 sq. ft. | ||||
Motor Specifications | Max Cutting Depth per Pass | Cutting Width | Dimensions (WxLxH) | Weight (lbs.) |
Honda GX160 Gas, 5.5 HP | 1/8" | 8" | 14" x 35" x 35" | 130 |
Production Rate – 300 sq. ft./hour Cutter life – 10,500 sq. ft. | ||||
Motor Specifications | Max Cutting Depth per Pass | Cutting Width | Dimensions (WxLxH) | Weight (lbs.) |
230V, 50/60 Hz, 1 Phase, 3 HP | 1/8" | 8" | 14" x 35" x 35" | 149 |
Production Rate – 300 sq. ft./hour Cutter life – 10,500 sq. ft. | ||||
Motor Specifications | Max Cutting Depth per Pass | Cutting Width | Dimensions (WxLxH) | Weight (lbs.) |
165CFM @ 90 PSI, 3.5 HP | 1/8" | 8" | 14" x 35" x 35" | 99 |
Individual Cutter | Cutters/Spacers Required Per Drum | Drum Assembly | |
---|---|---|---|
Wire Brushes | N/A | N/A | 320.9620 |
Beam Cutters | 320.5120 | 226 Pieces | 320.1020SB |
Star Cutters | 320.3658 | 208 Pieces | 320.1020SS |
TCT Cutters and Spacers | 320.5500 320.4140 | 80 Pieces 88 Pieces | 320.1020ST |
Milling Cutters (22mm) | 320.5600 | 24 Pieces | 320.1020SM |
TCT Cutters (for grooving) and Spacers | 320.5500 320.4140 | 24 Pieces 232 Pieces | 320.002G |
Shortcuts: | Downloads: |
---|---|