Pneumatic Angle Grinder

Made for versatility and power

  • L 1506 VV AIR
  • L 1506 VV AIR

Powerful 1 HP Pneumatic Angle Grinder

  • Specifications
  • Accessories
  • EASY-LOCK Clamping System
L 1506 VV AIR Specifications
Part No.L 1506 VV AIR
Max. diameter4-1/2"
Speed6000 RPM
Power1 HP
Spindle thread5/8"-11
Weight4 lbs.
Air consumption33 CFM @90 PSI
Air connection1/4"

Part No.Description
194.034Side Handle
251.6825" Guard
252.185Carrying Case

Stepped Adapter

Stepped Adapter (optional) adapts vacuum port to a 1-1/4" dia. hose. Part Number: 5.453-016

Using the EASY-LOCK clamping nut (included), you can change any abrasive disc on an angle grinder in a matter of seconds – without tools!

Thanks to the new EASY-LOCK clamping nut, abrasives can now be changed in seconds without any tools. The EASY-LOCK clamping nut will work with any abrasive with a hemp or ABS backing plate and a 7/8” arbor. That means you can change any CS Unitec/Eisenblatter abrasive on an angle grinder in a matter of seconds using this uniquely simple solution.

The clamping collar shaped on the top of the EASY-LOCK clamping nut can secure flap discs and abrasives with a “thicker” backing disc as well as centering them. “Thin” abrasives such as cutting discs, etc. can simply be secured using the reverse of the EASY-LOCK clamping nut.

Easy Lock Steps
  1. Secure the disc loosely by hand using the EASY-LOCK clamping nut.
  2. Press the spindle lock and tighten the disc by turning it clockwise by hand. That’s all there is to it!
  3. To release the disc, press the spindle lock and turn the disc counter-clockwise by hand.