Petrochemical
Petrochemical
Heavy‑Duty Tools Engineered for Hazardous Environments
In the petrochemical industry, equipment must perform flawlessly under extreme conditions where heat, corrosion, vibration, and volatile atmospheres are part of everyday operations. CS Unitec delivers rugged, reliable power tools designed to keep petrochemical facilities operating safely and efficiently.
Our solutions help maintenance crews, shutdown teams, fabricators, and NDT specialists get more work done with less downtime while meeting strict safety and compliance requirements.
PRODUCT FILTER
Search :
Filter by tool type
Filter by Category
Air Power
- Cut steel pipe up to 30" I.D.
- Strokes per Minute: 100-350
- Stroke Length: 2-3/8"
- ATEX Certified on select models
- Connection: 3/4" NPT (ID)
- Motor Power: 1.5 HP
- Air Consumption: 51 CFM @ 90 PSI
- Accessory Clamps for Pipes and Profiles
Air Power
- Cutting Capacity: 6" Diameter in Steel, 8" Diameter in Plastic
- ATEX Certified for EX
- Strokes per Minute: 0-2300
- Stroke Length: 1-1/8"
- Connection: 1/2" NPT (ID)
- Motor Power: 1.7 HP
- Air Consumption: 51 CFM @ 90 PSI
Hydraulic Power
- Cutting Capacity: 6" Diameter in Steel, 8" Diameter in Wood
- Strokes per Minute: 1700
- Stroke Length: 1-1/8"
- Connection: Whip hoses & FF Couplings included
- Motor Power: 2 HP
- Oil Flow: 6 GPM flow (up to 13 GPM) @ 2000 PSI
Electric Power
- Cutting Capacity: 6" Diameter in Steel, 8" Diameter in Wood
- Strokes per Minute: 0-2200
- Stroke Length: 1-1/8"
- Motor Power: 12 Amp, 110 V (220 Available)
Hydraulic Power
- Cut up to 30" O.D. pipe
- Round Shaft for underwater tight seal
- Strokes per Minute: 100-500
- Stroke Length: 2-3/8"
- Oil Flow: 2.6-13.2 GPM @ 2000 PSI
- Motor Power: 3.8 HP
- Whip hoses & FF Couplings included
- Accessory clamps for pipe and profile
Electric Power
- Cut up to 30" I.D. Pipe
- Strokes per Minute: 200-400
- Stroke Length: 2-3/8"
- Motor Power: 1.5 HP, 11 Amp, 110 V
- Accessory Clamps for Pipe and Profiles
Air Power
- Cutting Capacity: Up to 8" (Round), 9"x8-1/5" (Rectangular)
- Blade Speed: 2.2-5.75 ft/s (Variable and Single Speed options available)
- Connection: R 1/4" female and 1/2" NPT (ID)
- Motor Power: 0.7-1.3 HP
- Air Consumption: 19 CFM - 43 CFM
- ATEX Certified for EX Zones
Hydraulic Power
- Cutting Capacity: Up to 8" (Round), 9"x8-1/5" (Rectangular)
- Blade Speed: 4.2 ft/sec
- Connection: 1/2" FF (HTMA) COUPLINGS
- Motor Power: 1.6 HP
- Oil Flow: 4 GPM @ 2000 PSI
- Whip hoses & FF Couplings included
- ATEX Certified for EX Zones
Electric Power
- Cutting Capacity: Up to 8" (Round), 9"x8-1/5" (Rectangular)
- Blade Speed: 2.0-4.9 ft/s (Variable and 2 Speed options available)
- Motor Power: 6 Amp
Air Power
- Cutting Capacity: 6" to 96" Diameter Pipe
- Speed: 350 / 1800 RPM
- Motor Power: 2.4 HP / 4 HP
Hydraulic Power
- Cutting Capacity: 6" to 96" Diameter Pipe
- Speed: 350 / 1800 RPM
- Connection: 1/2" FF (HTMA)
- Motor Power: 2.7 HP
- Oil Speed: 6 GPM (up to 13 GPM) @ 2000 PSI
- Whip hoses & FF Couplings included
Electric Power
- Cutting Capacity: Up to 0.375" in mild steel and 0.276" in stainless steel
- Strokes per Minute: Single and 2 gear options available
- Power: 7 to 17 Amp
Air Power
- Cutting Capacity: Up to 25"
- Connection: 3/4" NPT (ID)
- Consumption: 92 CFM @ 90 PSI
- Motor Power: 4 HP
- Ideal for cutting plastic, polyethylene, and wood
Air Power
- Cutting Capacity: Up to 25"
- Connection: 3/4" NPT (ID)
- Consumption: 92 CFM @ 90 PSI
- Motor Power: 4 HP
- Ideal for cutting plastic, polyethylene, and wood
Air Power
- Cutting Capacity: Up to 25"
- Connection: 3/4" NPT (ID)
- Consumption: 92 CFM @ 90 PSI
- Motor Power: 4 HP
- Ideal for cutting plastic, polyethylene, and wood
Hydraulic Power
- Max. Bolt Size: Up to 1-3/8" (M 36)
- Tightening Torque: Up to 1840 ft-lbs.
- For underwater use
- Whip hoses & FF Couplings included
Hydraulic Power
- Drive Torque: Up to 369 ft.-lbs.
- Load Speed: Up to 95 RPM
- Oil Flow: 4-13 GPM
- Power: 1.6 HP
- Whip hoses & FF Couplings included
Air Power
- Torque: Up to 405 ft.-lbs.
- Male Square Drives: 1/2", 3/4", and 1"
- Turning and Tightening for Valves and more
- Load Speed: Up to 125 RPM
- Power: 0.9 HP
Accessory
- Automatic feeding pipe clamp
- Models for Electric & Hydraulic Hacksaws available
- Models for Air Hacksaws available
Accessory
- Extend pipe clamp up to 30" OD
- Use with clamps 5 1202 9950, 5 1202 9960, 5 1208 9980 and 5 1208 9990
Accessory
- Ferrous and non-ferrous metals
- Extremely hard specialty alloy steels
- Softer malleable and lightweight metals
- Cut steel, stainless steel, aluminum, cast iron, wood, plastic, masonry and more
