10" Walk-Behind Floor Scarifier

10" cutting width for use in medium to large jobs

Remove coatings and corrosion from steel and concrete surfaces to prepare for re-coating. Level and remove hard materials. Remove painted lines.

Cutter Applications
Beam Cutters are ideal for light paint/corrosion removal, with minimal damage to substrate.
Star Cutters are ideal for the removal of mastics and rubberized coatings.
Tungsten Carbide Tipped (TCT) Cutters are ideal for aggressive applications such as roughing concrete and heavy corrosion removal, as well as grooving roadways for non-slip surface.
Milling Cutters are ideal for the removal of plastic road markings without penetrating the surface.

Model Number 326.2000T
Motor Specifications	Max Cutting Depth per Pass	Cutting Width	Dimensions (WxLxH)	Weight (lbs.)
Production rate – 535 sq. ft./hour Cutter life – 16,000 sq. ft.
Honda GX240 Gas, 8 HP	1/4"	10"	17" x 44" x 45"	408

Model Number 326.2006T
Motor Specifications	Max Cutting Depth per Pass	Cutting Width	Dimensions (WxLxH)	Weight (lbs.)
Production rate – 535 sq. ft./hour Cutter life – 16,000 sq. ft.
415V, 50/60 Hz, 3-Phase, 7.5 HP	1/4"	10"	17" x 44" x 45"	408

TFP 260 Cutters
	Individual Cutter	Cutters/Spacers Required Per Drum	Drum Assembly
Beam Cutters	326.5120	332 Pieces	320.1020SB
Star Cutters	326.3658	342 Pieces	320.1020SS
TCT Cutters and Spacers	320.7009 320.1460	123 Pieces 129 Pieces	320.1020ST
Milling Cutters (22mm)	320.5680	60 Pieces	320.1020SM
TCT Cutters (for grooving) and Spacers	320.7009 320.1460	36 Pieces 224 Pieces	320.002G

Shortcuts:	Downloads:
8" Walk-Behind Floor Scarifier Hand-Held Scarifiers Dust Extraction Vacuums Surface Preparation Tools	Catalog Page: Floor Scarifiers (PDF) Complete Metalworking Tools Catalog (PDF) Complete Contractor Catalog (PDF) Operating Manual: TFP 260 (PDF) Schematics: TFP 260 (PDF)

11-Head Floor Scabbler - Pneumatic
24,000 light blows per minute with low vibration technology.
5-Head Floor Scabbler - Pneumatic
Level high spots; texture and roughen concrete. 6500 BPM.
Triple Head Pneumatic Hand-held Scaling Hammers
Remove thick scale, heavy corrosion, and more. 9,000 BPM.
8" Walk-Behind Floor Scarifier
Gas, electric, and pneumatic models with depth control.
MEGA HIPPO Mixing Stations
Mix, transport & pour with one unit - with lid and vac port
Pneumatic Vacuum - Antistatic/ATEX Certified for Ex Zones - Wet/Dry
Air-Powered Dust Collection Vacuum Ideal for Hazardous Env.
Standard Pistol Needle Scalers
Clean/stress relieve welds, texture concrete, demo coatings
END 130/3.2 PO
3-speed diamond core drill for holes up to 6" dia.
Electric Hand-Held Scarifiers - Rotopeen™
Cleaning and preparing steel and concrete. 2" and 4" widths