Urgent Weekend/Holiday Fulfillment Available - Click For Details 
Cortadores de cobalto de la serie 7
Cortadores de cobalto Unibroach®
- Los cortadores de cobalto Unibroach® se fabrican con 5 % de cobalto para aumentar la resistencia al desgaste
- Excelentes resultados cuando se perfora acero de alta resistencia y materiales difíciles de maquinar
- Orificios piloto incluidos en cortadores hasta 4 "de profundidad
- Disponibles con recubrimiento de TiAlN a solicitud
- Disponibles para orificios de hasta 5" de diámetro.
- Vástago de 3/4" estándar para cortadores de hasta 3" de diámetro,
- Vástago de 1-1/4" para cortadores de más de 3" de diámetro.
Hay cortadores métricos disponibles a solicitud. Para conocer tamaños personalizados de cortador y especificaciones, llame al 1-800-700-5919 o al 203-853-9522 para obtener asistencia.
- Profundidad de 1"
- Profundidad de 2"
- Profundidad de 3"
- Información de referencia de cortadores anulares
| N.° de pedido | Diámetro | N.° de pedido | Diámetro | |
|---|---|---|---|---|
| 7-1-114 | 7/16" | 7-1-172 | 2-1/4" | |
| 7-1-116 | 1/2" | 7-1-174 | 2-5/16" | |
| 7-1-118 | 9/16" | 7-1-176 | 2-3/8" | |
| 7-1-120 | 5/8" | 7-1-178 | 2-7/16" | |
| 7-1-122 | 11/16" | 7-1-180 | 2-1/2" | |
| 7-1-124 | 3/4" | 7-1-182 | 2-9/16" | |
| 7-1-126 | 13/16" | 7-1-184 | 2-5/8" | |
| 7-1-128 | 7/8" | 7-1-186 | 2-11/16" | |
| 7-1-130 | 15/16" | 7-1-188 | 2-3/4" | |
| 7-1-132 | 1" | 7-1-190 | 2-13/16" | |
| 7-1-134 | 1-1/16" | 7-1-192 | 2-7/8" | |
| 7-1-136 | 1-1/8" | 7-1-194 | 2-15/16" | |
| 7-1-138 | 1-3/16" | 7-1-196 | 3" | |
| 7-1-140 | 1-1/4" | 7-1-198 | 3-1/16" | |
| 7-1-142 | 1-5/16" | 7-1-1100 | 3-1/8" | |
| 7-1-144 | 1-3/8" | 7-1-1102 | 3-3/16" | |
| 7-1-146 | 1-7/16" | 7-1-1104 | 3-1/4" | |
| 7-1-148 | 1-1/2" | 7-1-1106 | 3-5/16" | |
| 7-1-150 | 1-9/16" | 7-1-1108 | 3-3/8" | |
| 7-1-152 | 1-5/8" | 7-1-1110 | 3-7/16" | |
| 7-1-154 | 1-11/16" | 7-1-1112 | 3-1/2" | |
| 7-1-156 | 1-3/4" | 7-1-1114 | 3-9/16" | |
| 7-1-158 | 1-13/16" | 7-1-1116 | 3-5/8" | |
| 7-1-160 | 1-7/8" | 7-1-1118 | 3-11/16" | |
| 7-1-162 | 1-15/16" | 7-1-1120 | 3-3/4" | |
| 7-1-164 | 2" | 7-1-1122 | 3-13/16" | |
| 7-1-166 | 2-1/16" | 7-1-1124 | 3-7/8" | |
| 7-1-168 | 2-1/8" | 7-1-1126 | 3-15/16" | |
| 7-1-170 | 2-3/16" | 7-1-1128 | 4" |
| N.° de pedido | Diámetro | N.° de pedido | Diámetro | |
|---|---|---|---|---|
| 7-1-214 | 7/16" | 7-1-272 | 2-1/4" | |
| 7-1-216 | 1/2" | 7-1-274 | 2-5/16" | |
| 7-1-218 | 9/16" | 7-1-276 | 2-3/8" | |
| 7-1-220 | 5/8" | 7-1-278 | 2-7/16" | |
| 7-1-222 | 11/16" | 7-1-280 | 2-1/2" | |
| 7-1-224 | 3/4" | 7-1-282 | 2-9/16" | |
| 7-1-226 | 13/16" | 7-1-284 | 2-5/8" | |
| 7-1-228 | 7/8" | 7-1-286 | 2-11/16" | |
| 7-1-230 | 15/16" | 7-1-288 | 2-3/4" | |
| 7-1-232 | 1" | 7-1-290 | 2-13/16" | |
| 7-1-234 | 1-1/16" | 7-1-292 | 2-7/8" | |
| 7-1-236 | 1-1/8" | 7-1-294 | 2-15/16" | |
| 7-1-238 | 1-3/16" | 7-1-296 | 3" | |
| 7-1-240 | 1-1/4" | 7-1-298 | 3-1/16" | |
| 7-1-242 | 1-5/16" | 7-1-2100 | 3-1/8" | |
| 7-1-244 | 1-3/8" | 7-1-2102 | 3-3/16" | |
| 7-1-246 | 1-7/16" | 7-1-2104 | 3-1/4" | |
| 7-1-248 | 1-1/2" | 7-1-2106 | 3-5/16" | |
| 7-1-250 | 1-9/16" | 7-1-2108 | 3-3/8" | |
| 7-1-252 | 1-5/8" | 7-1-2110 | 3-7/16" | |
| 7-1-254 | 1-11/16" | 7-1-2112 | 3-1/2" | |
| 7-1-256 | 1-3/4" | 7-1-2114 | 3-9/16" | |
| 7-1-258 | 1-13/16" | 7-1-2116 | 3-5/8" | |
| 7-1-260 | 1-7/8" | 7-1-2118 | 3-11/16" | |
| 7-1-262 | 1-15/16" | 7-1-2120 | 3-3/4" | |
| 7-1-264 | 2" | 7-1-2122 | 3-13/16" | |
| 7-1-266 | 2-1/16" | 7-1-2124 | 3-7/8" | |
| 7-1-268 | 2-1/8" | 7-1-2126 | 3-15/16" | |
| 7-1-270 | 2-3/16" | 7-1-2128 | 4" |
| N.° de pedido | Diámetro | N.° de pedido | Diámetro | |
|---|---|---|---|---|
| 7-1-324 | 3/4" | 7-1-378 | 2-7/16" | |
| 7-1-326 | 13/16" | 7-1-380 | 2-1/2" | |
| 7-1-328 | 7/8" | 7-1-382 | 2-9/16" | |
| 7-1-330 | 15/16" | 7-1-384 | 2-5/8" | |
| 7-1-332 | 1" | 7-1-386 | 2-11/16" | |
| 7-1-334 | 1-1/16" | 7-1-388 | 2-3/4" | |
| 7-1-336 | 1-1/8" | 7-1-390 | 2-13/16" | |
| 7-1-338 | 1-3/16" | 7-1-392 | 2-7/8" | |
| 7-1-340 | 1-1/4" | 7-1-394 | 2-15/16" | |
| 7-1-342 | 1-5/16" | 7-1-396 | 3" | |
| 7-1-344 | 1-3/8" | 7-1-398 | 3-1/16" | |
| 7-1-346 | 1-7/16" | 7-1-3100 | 3-1/8" | |
| 7-1-348 | 1-1/2" | 7-1-3102 | 3-3/16" | |
| 7-1-350 | 1-9/16" | 7-1-3104 | 3-1/4" | |
| 7-1-352 | 1-5/8" | 7-1-3106 | 3-5/16" | |
| 7-1-354 | 1-11/16" | 7-1-3108 | 3-3/8" | |
| 7-1-356 | 1-3/4" | 7-1-3110 | 3-7/16" | |
| 7-1-358 | 1-13/16" | 7-1-3112 | 3-1/2" | |
| 7-1-360 | 1-7/8" | 7-1-3114 | 3-9/16" | |
| 7-1-362 | 1-15/16" | 7-1-3116 | 3-5/8" | |
| 7-1-364 | 2" | 7-1-3118 | 3-11/16" | |
| 7-1-366 | 2-1/16" | 7-1-3120 | 3-3/4" | |
| 7-1-368 | 2-1/8" | 7-1-3122 | 3-13/16" | |
| 7-1-370 | 2-3/16" | 7-1-3124 | 3-7/8" | |
| 7-1-372 | 2-1/4" | 7-1-3126 | 3-15/16" | |
| 7-1-374 | 2-5/16" | 7-1-3128 | 4" | |
| 7-1-376 | 2-3/8" |
| Series de perforadoras | Materiales | |||||
|---|---|---|---|---|---|---|
| Lubricación/Lubricante refrigerante | Aluminio/ Metales no ferrosos | Acero <500 N/m² | Acero de grano fino < 700 N/m² | Acero de grano fino < 1000 N/m² | Vaciado de | acero inoxidable |
| HSS estándar | 25 a 30 m/min | 25 m/min | 10 a 20 m/min | |||
| Aceite lubricante | X | |||||
| Rociador de grasa | X | |||||
| Pasta de grasa | ||||||
| Lubricante especial | X | |||||
| BLINDADOS | 10 a 15 m/min | 10 a 15 m/min | 10 a 15 m/min | |||
| Aceite lubricante | X | X | X | |||
| Rociador de grasa | X | X | X | |||
| Pasta de grasa | X | X | ||||
| Lubricante especial | X | X | ||||
| TCT HORNET | 35 m/min | 25 m/min | 20 m/min VCE | 20 m/min VCE | ||
| Lubricante refrigerante | X | X | X | X | ||
| Emulsión para perforación | X | X | X | X | ||
VCE = Electrónica de control de onda completa (Full wave control electronics)
Velocidad de corte: (d x π x n) / 1000 = m/min.
Velocidad: n = (v x 1000) / (d x π) = min-1
| ACCESOS DIRECTOS: | DESCARGAS: |
|---|---|
Estudios de caso de CS Unitec
