Corner Drills and Drives, Bridge Reamers

Pneumatic and hydraulic: high-torque drilling, reaming and driving units

Model 2 1801 0030

Corner Drills and Bridge Reamers

Small side-to-side distance for working in tight spaces
Self-closing roll throttle
Built-in oiler for motor
Ideal for bridge reaming and drilling applications
One-year warranty

Pneumatic Corner Drill Model No.	Morse Taper	Drilling (in steel)	Reaming (in steel)	Tube Rolling Cap.	Torque Output (ft./lbs.)	Load Speed (RPM)	Motor Power (HP)	CFM at 90 PSI	Length	Weight (lbs.)
Nonreversible
2 1602 0030 Schematics (PDF)	#1	5/8"	1/2"	N/A	7	500	0.7	21	12.5"	7
2 1701 0030 Schematics (PDF)	#2	7/8"	5/8"	N/A	35	270	1.8	49	20.9"	19
2 1801 0030 Schematics (PDF)	#3	1-1/4"	1"	N/A	53	260	2.6	63	22.5"	25
Reversible
2 2104 0030 Schematics (PDF)	#4	2-1/8"	2"	2"	86	180	3.0	71	23.8"	37

Model No. 2 1602 0030 has a 3/8" NPT air inlet. 1/2" (13mm) hose is recommended. All other models have 3/4" NPT air inlet. A 1/2" (13mm) hose is recommended for model 2 1701 0030. A 5/8" (15mm) hose is recommended for models 2 1801 0030 and 2 2104 0030.

Hydraulic Corner Drill Model No.	Morse Taper	Drilling (in steel)	Reaming (in steel)	Tube Rolling Cap.	Torque Output (ft./lbs.)	Load Speed (RPM)	Motor Power (HP)	Oil Flow / PSI	Length	Weight (lbs.)
2 1806 0010	#3	1-1/4"	1"	N/A	60	220	3.8	4 GPM @ 2000	21"	25

Model 2 2087 0010
With reverse and lever throttle

Slow-speed, High-torque Straight Drive Units

Ideal for heavy-duty reaming, tube expanding and tapping
Perfect for special driving applications, including pipe tapping and valve turning

Pneumatic Drive Unit Model No.	Square Drive ID	Torque Output (ft./lbs.)	Load Speed (RPM)	Reversible	Tube Rolling Cap.	Tapping Cap.	Motor Power (HP)	CFM at 90 PSI	Height x Length	Weight (lbs.)
2 2081*	13/16"	413	20	YES	3"	1-1/2"	1.35	53	10.9" x 26.5"	29
*2 2087†**	7/8"	413	20	YES	3"	1-1/2"	1.35	53	10.9" x 26.5"	29
*2 2088†**	7/8"	138	60	YES	2"	3/4"	1.35	53	10.9" x 26.5"	29

Square Drive Accessories
2 2089 7020 – 7/8" Male Square Drive to 3/4" Male Square Drive
2 2089 7070 – 7/8" Male Square Drive to 1" Male Square Drive
6 1016 7940 – 7/8" Male Square Drive to 1" Male Square Drive with retaining pin

* The last four digits of the Model No. identify the type of throttle. † Square drive accessories available (see above).
Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.