Hammering under load
3,000 blows per minute

Air Rotary Hammer Drills — SDS Plus
1" Bit Capacity For Drilling Concrete and Masonry

Model No. 2 2404 0010 - Air Rotary Hammer Drill
Model No. 2 2404 0030 - Underwater Air Hammer Drill

  • Uses SDS - plus Shank Drill Bits
  • Holes up to 1" Diameter with Solid Carbide Tipped Bits; up to 3" Diameter with Carbide Core Bits

Fast impact drilling of anchor holes and thru holes for concrete and masonry.

Safer than electric in hazardous atmospheres and wet environments. Designed for use in refineries, chemical plants, utilities, construction and heavy industry.

A special water flushing attachment is included for suppression of sparks and dust.

Uses standard SDS - Plus carbide tipped drill bits; up to 1" solid bits in concrete and 3" core bits in brick and block.

Easily converts to straight drilling for steel and wood.

 

FEATURES:

  • Holes cost less with SDS Bits.
  • Pneumatically powered to eliminate electric motor sparking.
  • Water hook-up at depth gauge to help protect against bit sparking.
  • Safety clutch protects against overloading and jamming.
  • Maintenance-free gearhead (permanent lubrication and sealed gears).
  • Built-in oiler for air motor.

ACCESSORIES

  • Carbide-tipped solid drill bits for concrete, brick and masonry from 3/16" to 1".
  • Carbide core bits from 1-1/4 to 3".
  • Optional 1/2" Chuck with SDS adapter P/N 2 2404 8999 for straight rotary drilling of steel and wood.

Specifications

Model Numbers
• Rotary Hammer Drill
• Underwater Hammer Drill


2 2404 0010
2 2404 0030

Drill Speed

0-625 RPM

Hammering Under Load

0-3000 BPM

Solid Bit Capacity (Concrete)

1" Dia.

Core Bit Capacity (Concrete)

3" Dia.

Twist Drill (Steel)

1/2" Dia.

Power @ 90 PSI

0.7 HP

Air Consumption @ 90 PSI

21 CFM

Tool System

SDS Plus

Air Connection
1/2" I.D.
Dimensions
16 x 8-1/2 x 4 inches
Weight
11 LBS

Model 2 2404 0010 Schematics (PDF)

Model 2 2404 0030 Schematics (PDF)

 

Three Operating Modes:
Air Rotary Hammer with Rotation
Hammer with Rotation
Ideal for Drilling Concrete
 
Air Rotary Hammer - Rotation Only
Rotation Only
Ideal for Drilling Wood and Steel

Air Rotary Hammer Drills — SDS Max
2" Bit Capacity for Drilling Concrete and Masonry

Model No. 2 2417 0010- Air Rotary Hammer Drill

  • Easy-to-use two-way mode selection lever
  • Uses SDS - Max Shank Drill Bits
  • Holes up to 2" Diameter with Solid Carbide Tipped Bits; up to 6" Diameter with Carbide Core Bits
  • Hammering mode for demolition

This Rotary Hammer Drill is used for drilling concrete, chiseling, crushing, grooving, edging, cutting, stripping, compacting, tamping and roughing concrete surfaces. Applications include installation of concrete anchors, piping and mechanical openings, as well as other construction and demolition work.

The SDS-Max Rotary Hammer Drill is designed for the following uses:
Use Required insert tools Working range
Drilling in concrete, masonry and natural stone Drill bit with SDS Max shank
• Carbide-tipped drill bits
• Percussion core bits		 Drilling range in concrete
• 1/2" to 2" dia.
• 1-3/4" to 6" dia.
Drilling in wood and metal • Chuck holder
• Keyless chuck
• Wood drill bits and metal drill bits with smooth or hex shank		 • Wood drill bits - 3/8" to 1-1/4" dia.
• Metal drill bits - 3/8" to 3/4" dia.

 

 

FEATURES:


CLICK HERE FOR SDS MAX DRILL BITS

  • Mechanical torque-limiting clutch
  • Low vibration, no-load hammering absorption
  • Quick-change chuck, SDS Max insert tool system
  • Drilling and chiseling modes
  • 24-way chisel position adjustment
  • Gearing and hammering mechanism with oil lubrication
  • Pivotable side handle
Depth gauge attachment (optional)

Specifications

Model Numbers
• Rotary Hammer Drill


2 2417 0010

Blows per minute

2500

Speed

250 RPM

Air Consumption @ 90 PSI

53 CFM

Tool System

SDS Max

Weight

26 LBS

Dimensions (LxHxW)

19.5" x 9.8" x 4.5"

Minimum Distance between wall and hole drilling

1.5"

Model 2 2417 0010 Schematics (PDF)
Email us for more information.

Have a Question?




All Fields Required