Accessories for Portable Magnetic Drills
| Lubricants || Power Assist || Pilot Pins for Cutters || Drill Chucks for Straight Shank Twist Drills |
| Quick-change Tapping Tools, Collets & Chucks || Arbors for Annular Cutters || 2-in-1 Drill/Taps | | Countersinks || Twist Drills || Cooling System || Extensions for Annular Cutters | | Power Worker Magnetic Cleanup Stick || Clamping Devices & Vacuum Plates | Lubricants
Coolant extends the life of cutting toolsProLube™ – Ideal for cutting steel, stainless steel and hard metalsYour cutting tools will work cooler, longer and more efficiently with ProLube™ Lubricants from CS Unitec.
ProLube Liquid – Water soluble 16:1 ProLube Paste – (CS 7030-712, 12 oz. tub)
Cutting Oil
[Part No. ZHS 006 (quart); ZHS 005 (gallon)] Upgrade your drill's cooling system with arbors with automatic cooling.
Pressurized Coolant BottleUse with any automatic internal lubrication system. [Part No. 9 4002 0020] Power Assist
The Power Assist is a standard capstan, designed with delayed torque transfer. This decreases the load on both cutter and drilling machine, allowing the machine to maintain max. RPM under full load.
Ordering InformationZPA 401 – Power Assist for CSU 32 and CSU 50 machines ZPA 402 – Power Assist for CSU 80 and CSU 100/RL machines ZPA 404 – Power Assist for MAB 825 and MAB 845 machines Pilot Pins for Cutters
Drill Chucks for Straight Shank Twist Drills
A) IBC 17 – 1/2" chuck for MAB 425, CSU 32AC and CSU 32RL B) IBC 18 – 1/2" chuck with 3/4" shank for AIRBOR™ and HB-4400 (fits all drills with 3/4" arbor bore) C) IBC 21 – 3/4" chuck with MT3 shank for MAB 825, CSU 80 and CSU 100/3 D) IBC 22 – 3/4" chuck with MT2 shank for MAB 455, MAB 525, CSU 50AC and CSU 50RL Quick-change Tapping Tools, Collets and Chucks![]()
Tap collets fit magnetic drills with 3/4" arbor bore. Available for taps 1/4" through 3/4". Hold standard USA taps conforming to ASA. ![]() Model No. GSW.222 C quick-change tapping chuck with MT2 connection, complete with flexible collet to tap 5/16" to 5/8". For use with CSU 50RL magnetic drill. Model No. GSW.830 C tapping chuck utilizes two variable clamp collets to tap 3/8" to 1-1/8". It is the least expensive system if you will tap more than 4 sizes. GSW.830 has an MT3 connection. For use with CSU 100/3 magnetic drill. Variable clamp collets (shown at right) for use in tap chuck No. GSW.830:
Model No. GSW.444 quick-change tapping chuck with MT4 connection (for MAB 1300).
Arbors for Annular Cutters
ZIA 219M – Morse Taper No. 2, 3/4" arbor bore, manual cooling Keyless Arbor with Automatic CoolingKeyless cutter arbors allow fast, no-tools changeover for 3/4" dia. shank annular cutters. ZSS 200 – Morse Taper No. 2 ZSS 300 – Morse Taper No. 3 2-in-1 Drill/Taps
Drill and tap with one tool! Sizes available: 82° and 90° Countersinks![]()
Countersink hole sizes: Twist Drills with 3/4" Weldon Shank![]()
Contact us for more information. Cooling SystemThe cooling system on all our drills has been upgraded for easier use. The coolant reservoir is quickly and easily attached to the magnetic drill via a new magnet system. The coolant flow is measurable and easily monitored through a clear cylinder. The hose connecting the reservoir to the spindle has also been upgraded. It is now equipped with a wear-resistant mechanical locking system that securely fastens the hose to the arbor. Extensions for Annular Cutters
Extra-long holders extend stroke of drills
* Hole diameter must be larger than 1-5/16" to accommodate width of extension.
6" length (p/n 7-9-906)
|
View our online catalog pages for:Downloads |