Band Saws Blades CS Unitec's SuperBand™ saw blades are made of tough M42 steel. 8% cobalt gives our blades the highest heat resistance and wear resistance of all portable band saw blades. The hardness is Rc 67-69. SuperBand™ saw blades easily cut most ferrous and nonferrous metals, including steel, stainless steel, Inconel, chrome, Hastelloy, tool steels, "super" alloys and other materials. Longer life, fewer blade changes and the fastest cutting rates result in SuperBand™ providing the lowest cost per cut.

 

Blades for standard saws (Model Nos. 5 6003 0010, 5 6046 0010 and 5 6043 0010)

No. 9 2506 0010	18 TPI	Cuts material 1/8" - 1/4" thick	44-7/8" L x 1/2" W x .025" T
No. 9 2506 0020	14 TPI	Cuts material 3/16 " - 1/2" thick	44-7/8" L x 1/2" W x .025" T
No. 9 2506 0030	10/14 TPI*	Cuts material 3/16 " - 1/2" thick	44-7/8" L x 1/2" W x .025" T
No. 9 2506 0040	8/12 TPI*	Cuts material 1/2" and thicker	44-7/8" L x 1/2" W x .025" T

Blades for Deep Throat™ saws (Model Nos. 5 6031 0010, 5 6047 0010 and 5 6041 0010)

No. 9 2506 0220	14 TPI	Cuts material 3/16 " - 1/2" thick	66" L x 5/8" W x .025" T
No. 9 2506 0230	10/14 TPI*	Cuts material 3/16 " - 1/2" thick	66" L x 5/8" W x .025" T
No. 9 2506 0240	8/12 TPI*	Cuts material 1/2" and thicker	66" L x 5/8" W x .025" T
No. 9 2506 0200	8 TPI	Cuts material 1/2" and thicker	66" L x 5/8" W x .025" T

* Variable tooth pitch (10/14 TPI and 8/12 TPI) saw blades cut faster and last longer than standard pitch blades.
* Varying tooth size and gullet depth reduce harmonic vibration for quieter, more efficient cutting.

 

Vise Clamp for Accurate Cuts Securely clamp to round, square and angular materials for straight cutting Easily attach to CS Unitec Portable Band Saws, model numbers: 5 6031 0010 5 6041 0010 5 6047 0010 Model No. 5 6031 9400 Clamp-on vise for 7" Deep Throat™ Band Saws Maximum material size – rounds: 7"; squares: 5"; angles: 5" Shown at right: Model 5 6031 9400 with Band Saw