Hacksaw Blades, Clamps & Accessories

Large Pipe Clamp with lever lock for no-tools tightening.
Model 5 1202 9950

Large Pipe Clamp
Model 5 1202 9960

Model No. 5 1207 9910
2" to 6" OD pipe clamp

Model No. 5 1202 9950
4" to 12 3/4" OD pipe clamp – lever lock provides no-tools tightening of chain (up to 24" OD with extension chain)

Model No. 5 1202 9960
4" to 12 3/4" OD pipe clamp – manual tightening of chain (up to 24" OD with extension chain)

Model No. 5 1207 8970
21-5/8" x 11-3/8" profile clamp

Lever Lock Assembly
Part No. 5 1202 9970
Can be used to retrofit manual clamp 5 1202 9960 for no-tools tightening of chain. Also fits similar clamps.

Small Pipe Clamp – up to 6" pipe dia.
Model 5 1207 9910

Profile Clamp
Model 5 1207 8970

Extend capacity of pipe clamps up to 24" OD.

Model No. 5 1201 9010 – 17-3/4" chain extension

Model No. 5 1201 9030 – 39-3/8" chain extension
(allows pipe clamp Nos. 5 1202 9960 and 5 1208 9940 to fit 24" OD pipe)

Model No. CP1 – Universal Clamp

• Self-aligning feet adjust to the form of the workpiece (round, square and angled)
• Accommodates 1/2" to 1-23/4" OD [up to 24" OD with extension chain no. CP1/10 (39-3/8" long)]
• CP1 easily attaches to most of our reciprocating saws for 90° cuts in tight spaces

Air-powered Clamp

Model No. 5 1208 9980 – Air-powered Automatic Clamp

• Save time and effort by automatically cutting pipe up to 12-3/4" OD (up to 24" OD with extension chain)
• Self-feeding device saves operator time, increases safety and makes work easier
• Easily attaches to CS Unitec air hacksaw and shares same 90 PSI air supply (Pipe clamp for use only with CS Unitec air hacksaw Model No. 5 1212 0010)
• Blade guide for straight cutting through pipe and difficult materials is optional

Self-feeding Mechanical Clamp

Model No. 5 1208 9990 – Automatic Mechanical Clamp

• Save time and effort by automatically cutting pipe up to 12-3/4" OD (up to 24" OD with extension chain)
• Self-contained gas cylinder provides constant feed pressure to saw blade
• Self-feeding device saves operator time, increases safety and makes work easier
• Easily attaches to CS Unitec electric hacksaw 5 1215 0070 or hydraulic hacksaw 5 1220 0050
• Optional blade guide for straight cutting through pipe and difficult materials

Ensure straight cutting through pipe and difficult materials.

Model No. 5 1207 9970 – for pipes up to 13" (20" min. blade length required)

Model No. 5 1207 8910 – for pipes up to 21" (30" min. blade length required)

All Unitec saw blades cut on backward stroke.

Two qualities:
1 - HSS for steel up to 600 N/mm 2 strength (carbon steel, etc.)
HSS-SL for high strength steel (stainless steel)

Length of blade = Operating length + 5-1/4 inches.
(Ex.: To cut a 10" diameter pipe use a blade with a minimum length of 16 inches.)