Hollow-core Surface Sanding and Polishing Accessories

PTX FLEECE (Nonwoven) Wheels

Elastic nylon fleece impregnated with abrasives for a first-class finish. Produces shadow-free matte, satin and polished finishes. For removing oxidation on stainless steel and nonferrous metals and also suitable for smoothing wooden surfaces. Very high fleece content by fleece compression.

PTX Interleaf (Combi) Wheels

Nylon fleece combined with abrasive flaps for matte finishing, burnishing and removing light scratches, oxidation and handling marks on stainless steel and all metals. For removing old paint on wood while smoothing at the same time.

PTX Flap Wheels

With radial abrasive cloth flaps in various grit sizes for removing rust, oxidation layers, minor scratches and for the regraining and burnishing of metals.

* For 4" wide 240 grit PTX Flap Wheel, order two qty. 47208

PTX CLEAN Wheels

Made of hard-textured, nonwoven fleece for cleaning and descaling welds, pore-deep removal of rust, oxidation and coatings, cleaning beams, bricks, etc. Produces an effective linear finish on stainless steel. A new production process guarantees 100% concentricity.

PTX GUM Wheels

Soft rubber impregnated with abrasive grit for the removal of minor scratches. Ideal for a bright, decorative linear finish on stainless steel and nonferrous metals and for smoothing wooden fibers.

Expansion Roller

Use with sanding belts, fleece and felt sleeves. The sleeves are simply pushed over the expansion roller and held securely in place by the centrifugal force. The expansion roller is helpful when grinding large areas and removing large welds.

3-1/2" dia. x 4" wide – Part Number: 47005

PTX Zirconium Grinding Belt Sleeve

Made of zirconium. Removes deep scratches and grinds weld seams on metals. Far less rework is required as a result of using the time-saving linear grinding technique.

PTX Ceramic Grinding Belt Sleeve

High-performance ceramic aluminum oxide grain. Increased removal rate and longest life for highest productivity. Excels in all metals.

PTX "TZ" Pyramid Sleeve

New abrasive cloth with pyramid-shaped grit structure. Allows high material removal while producing a very fine finish, reducing the amount of work required when compared to grinding belt sleeves and fleece sleeves. Pyramid sleeves are ideal for pre-polishing for fine mirror finishes and for removing scratches and spot welds. Even roller scale can be removed easily.

PTX Fleece "Nonwoven" Sleeve

Nylon impregnated with abrasive grit for removing minor to medium scratch marks and oxidation coatings, matte and satin finishing and deburring applications.

PTX Stranded Wire Wheels

Sturdy steel wire brush. For deburring, rust removal, roughing and cleaning metal. For brushing out soft annual rings on timber, leaving a rough rustic effect.

4" dia. x 2-7/8" wide – Part Number: 46301
4" dia. x 1" wide – Part Number: 47702*

* Requires spacer rings 40007

PTX Bristle Wheels

Elastic nylon brush impregnated with abrasive grit. For roughing and deburring metal, as well as creating a rustic effect with even annual ring transitions on timber.

4" dia. x 2-7/8" wide – Part Number: 46101
4" dia. x 1" wide – Part Number: 46102N*

* Requires spacer rings 40007

PTX Stainless Steel Wire Wheels

Elastic stainless steel wire brush. For cleaning welds, deburring, removing rust, roughing and removing coatings.

4" dia. x 2-7/8" wide – Part Number: 251 625
4" dia. x 1" wide – Part Number: 47722*

* Requires spacer rings 40007

PTX Fiber Wheel

Elastic fiber brush. For polishing stained wood, satin finishing, pore-deep dust removal and cleaning applications.

4" dia. x 4" wide – Part Number: 46400

Cotton Buffing Wheel

Cotton yarn wheel for use with compounds. Produces a very bright high mirror finish. Use on flat, contoured or irregular surfaces.

4" dia. x 2" wide – Part Number: CS2405*
4" dia. x 4" wide – Part Number: CS2410
4" dia. x 6" wide – Part Number: CS2420

PTX Felt Sleeve

Made of soft merino (endless) for polishing large stainless steel and nonferrous surfaces quickly to a mirror finish. Also suitable for hard plastics. Must be used with the expansion roller.

3-1/2" dia. x 4" wide – Part Number: 42013

PTX SuperPolish Sleeve

Revolutionary special fleece produces perfect brilliant, shadow-free mirror finishes on stainless steel and nonferrous metal surfaces using polishing compounds (white and blue) and pink polishing cream. SuperPolish fleece is absorbent, does not smear and saves significant work time. Must be used with the expansion roller.

3-1/2" dia. x 4" wide – Part Number: 42013N

Poly-PTX Cotton Rings

Fleece rings for polishing narrow or un-even stainless steel and non-ferrous metal surfaces surfaces using polishing compounds (white and blue) and pink polishing cream A separate Poly-PTX Cotton Ring must be used for each compound or cream so as not to mix different compound grits.

For polishing narrow or uneven stainless steel surfaces:
100mm x 12mm (4" dia. x 1/2" wide), 8 per pack – Part Number: 40019M

For polishing aluminum, brass and other nonferrous metals:
100mm x 12mm (4" dia. x 1/2" wide) – Part Number: 250 521

PTX Pre-grinding & Polishing Compound

Essential for polishing all metals, including stainless steel, aluminum, etc.

PTX® WHITE pre-polishing compound (23 oz.) – Part Number: 40013
PTX® BLUE finishing compound (23 oz.) – Part Number: 40014
PTX® WHITE and BLUE mini pastes (approx. 4.2 oz. ea.) – Part Number: 40009

PTX Polishing Cream, Pink

For finishing. Produces a perfect mirror finish on stainless steel and nonferrous metals when used with the SuperPolish Sleeve.

Can, 2.2 lbs. – Part Number: 40015
Miniature tube, 2 oz. (approx.) – Part Number: 40015T

PTX Lime (noncaustic)

For removing cream and compound residues. Scatter on the surface, and wipe off with a microfiber cloth.

Can, 2.2 lbs. – Part Number: 40016
Aluminum scatter container (approx. 5.3 oz.) – Part Number: 4002A
Scatter container only – Part Number: 40020

Micro-fiber Cloths

For pore-deep cleaning and even distribution of maintenance products and polishes. Our micro-fiber cloths produce a top finish on all materials.

Size: 13" x 14" – Part Number: 40030

INOX-Protect (hard sealant)

Protects finished and polished metal surfaces (stainless steel, steel, aluminum, brass, copper, etc.) with a clear, dry adhesive film. Removes fingerprints and other dirt.

Canister (including spray bottle), 1.3 gal. – Part Number: 40041
Spray bottle, 17 oz. – Part Number: 40040

Brilliance-Clean

For streak- and residue-free cleaning of all surfaces, including stainless steel, steel, aluminum, brass and copper. Brilliance-Clean is not harmful to plastics, wood or coated surfaces. It removes fingerprints, dust, compound residue, minor oil and grease marks and adhesive residue effortlessly. Evaporates quickly without leaving any residue on the surface.

Canister (including spray bottle), 1.3 gal. – Part Number: 40051
Spray bottle, 17 oz. – Part Number: 40050

POLY Protection (oil film)

For cleaning and preserving finished and polished stainless steel and nonferrous metal surfaces. Protects against shadows and finger and water marks for a long time. Spray on and rub off with a microfiber cloth. Produces a darker effect on finished surfaces. Also suitable for food-grade and outdoor use.

Canister (including spray bottle), 1.3 gal. – Part Number: 40012
Spray bottle, 17 oz. – Part Number: 40011

PTX Grinding Belt Roller with stainless steel flanges

For grinding, fleece, SuperPolish and felt belts. The belt roller is made of wear-resistant soft Vulculan with stainless steel discs on the sides. The surface is grooved to ensure that the abrasive belt does not slip.

Diameter: 3.5" x 2.8" – Part Number: 47006

PTX Grinding Belt in high-quality aluminum oxide (closed)

For coarse and initial grinding, rust removal and smoothing round metal pipes. For use with grinding belt rollers. For use on closed pipe constructions, see TIPS & TRICKS.

PTX TZ-Pyramid Belt (closed)

New abrasive fabric with pyramid-shaped grit structure for removing scratches, roller scale and spot welds. TZ-Pyramid belts allow high material removal while producing a very fine finish. They are ideal for the initial grinding before polishing to a mirror finish. Because the grit fineness is increased slowly, it is possible to omit several operations. For use with grinding belt rollers. For use on closed pipe constructions, see TIPS & TRICKS.

PTX Fleece Nonwoven Belt (open)

Buttonhole fastening system for fine grinding and pre-polishing on open and closed pipe constructions and handrails. The fleece belt can be opened and closed as often as necessary. For use with grinding belt rollers. International patent and design protected.

PTX Felt Belt (open)

Made of merino felt with buttonhole fastening system for polishing work on open and closed pipe constructions and handrails. The polishing belt can be opened and closed as often as necessary. For use with grinding belt rollers and our polishing compounds and creams. Use a separate felt belt for each compound and cream grit. Do not use compounds with different grits on felt. International patent and design protected.

Dimensions: 1.2" x 26" – Part Number: 49004

PTX SuperPolish Belt (closed)

For a perfect mirror finish on pipe constructions and handrails. SuperPolish is a new, special micro fleece that produces a perfect, brilliant mirror finish on stainless steel and nonferrous metals. Smears and shadows are eliminated when used with our polishing compounds (white and blue) and pink cream. SuperPolish is absorbent and saves lots of work time. For use with grinding belt rollers.

Dimensions: 1.2" x 26" – Part Number: 49004N
(not available with buttonhole fastening system)

PTX Special Adhesive Tape

With glass fabric insert for joining grinding belts. Strong, heat-resistant adhesive force. For joining PTX grinding and "TZ" Pyramid belts for use on closed pipe constructions. Affix the adhesive tape over the entire length of the grinding belt, overlapping approximately 370°.

Dimensions: 1" x 165' – Part Number: 49000

INOX Miter Tape

Protect adjacent finishes when grinding. Self-adhering 304 Stainless tape for use when creating distinct edges on finishes. Excellent for creating mitered corners. Quick application and residue-free removal. Minimal thickness for accurate grinding lines. Easily cut with scissors.

Dimensions: One roll measures 6" x 8.2 ft. – Part Number: 490070

Hollow-core Shaft Adapter

Allows user to utilize more economical hollow-core abrasives on traditional surface finishers. Fits 3/4" dia. x 4" long shaft and 1/4" keyway(s).

Part Number: 42004

PTX Eco Smart Surface Finishing Kits

We offer a variety of PTX Eco Smart Kits for metalworking and woodworking.

Click here to view all of our PTX Eco Smart Kits.

PTX Eco Smart Cases

Basic Case – Solid case for storage and outdoor use – Part Number: 40008

Professional Case (shown)– Shock-resistant hard-top case with foam inlay; ideal for construction sites and outdoor work; lockable (includes 2 keys) – Part Number: 80002