Up
to 14" Deep Cutting Capacity
|
|
Plunge Cutting
|
Cutting with SpeedHook®
|
Features
• Safety operating trigger prevents accidental starting.
• Built-in Wallwalker¨ provides leverage advantage to make cutting
easier.
• Modular design for easy service.
• Tough industrial finish - on die-cast aluminum body.
Weight:
• Without bar and chain: 29 lbs, (13 kg)
• With 11" bar and chain: 33 lbs, (15 kg)
• With 15" bar and chain: 34 lbs, (15.5 kg)
Noise
Level:
• 88 dB at 3 feet approx. 1 meter |
Air
Concrete Chain Saw with Diamond Chain
Cut
with ease, speed and portability through Reinforced Concrete,
Brick, Block, Concrete Pipe and Natural Stone. The powerful CS
71773 air saw is designed to cut through walls, floors and columns
in a single pass.
CS Unitec
developed the high-performance CS 71773 pneumatic concrete cutting
chain saws for the professional concrete cutter. This series of
professional saws is built tough to stand up to everyday use in
the harsh environment of concrete cutting.
The unique
versatility of a concrete cutting chain saw includes the ability
to cut small mechanical openings, deep plunge cuts (up to 14" deep and 13"
square), perfect corners and an endless variety of irregular shapes
that are simply not possible with circular saws.
While other
folks are cutting with ordinary saws, you can be cutting faster,
cheaper and more reliably with the all new CS 71773.
Advantages
and Uses
• Fast and efficient.
• Versatile and easy to use.
• Straight cuts through concrete up to 14" in a single pass.
• Cuts mechanical openings quickly.
• Narrow, straight plunge cuts up to 14" deep and 13" square
cutting depth.
• Perfect corners.
• Reliable and easy to maintain. No belts, carburetors or fuel lines
to maintain.
• Stretch Reduction System (SRS) maximizes chain life and reduces
need for adjustments.
• Dependable, powerful pneumatic power, 6.5 HP.
• No gas or engine fumes to deal with.
• Low cost of operation.
• Pays for itself every time you use it with faster cutting and
completion of most jobs in a fraction of the time other saws would
take.
Technical
Specifications
| Air
Motor Power |
6.5
HP (5 KW) |
| Operating
Speed |
5,700
RPM (avg. free running)
4,900 sfm (avg. free running chain) |
| Weight
without bar and chain |
29
lbs. (13.15 kg) |
| Length
x Height x Width |
20"
x 10.5" x 12"
(58.5 cm) x (26.5 cm) x (30.48 cm) |
| Air
Supply Requirements * |
124
CFM @ 90 PSI |
| Water
Requirements |
Minimum
1 GPM / Minimum 20 PSI |
| *
When operating a compressor with pressure greater than 90
PSI, it is recommended to use a "service unit with pressure
regulator" in line to prevent over speeding the saw. |
|
