8" Walk-Behind Floor Scarifier

Gas • Electric • Pneumatic - Remove rust, scale, paint, adhesives and more from steel and concrete

  • TFP 200 Floor Scarifier - Gas
  • TFP 200 Floor Scarifier - Electric
  • TFP 200 Floor Scarifier - Air
  • TFP 200 Floor Scarifier - Line Removal
  • TFP 200 Floor Scarifier - Removing Paint
  • TFP 200 Floor Scarifier - Coating Removal
  • TFP 200 Floor Scarifier - Gas
  • TFP 200 Floor Scarifier - Electric
  • TFP 200 Floor Scarifier - Air
  • TFP 200 Floor Scarifier - Line Removal
  • TFP 200 Floor Scarifier - Removing Paint
  • TFP 200 Floor Scarifier - Coating Removal

Additional applications:

  • Keyed or grooved profiles
  • Roughing concrete

Features:

  • Depth control maximizes performance and extends cutter life
  • Integrated vacuum connection and hold-to-run handle
  • Fully adjustable handlebar for operator comfort
  • Electric, pneumatic or gas power

8" cutting width for use in large areas

CS Unitec's Trelawny™ Floor Scarifiers tackle the most demanding surface preparation and material removal applications. Ideal for the removal of coatings and corrosion from steel and concrete surfaces to prepare for re-coating. Produce an ideal keyed or grooved profile on concrete for waterproofing and non-slip surface applications.


Cutter Applications
Wire Brushes are ideal for finish cleaning and polishing on steel; can be used for light concrete deposit.
Beam Cutters are ideal for light paint/corrosion removal, with minimal damage to substrate.
Star Cutters are ideal for the removal of mastics and rubberized coatings.
Tungsten Carbide Tipped (TCT) Cutters are ideal for aggressive applications such as roughing concrete and heavy corrosion removal, as well as grooving roadways for non-slip surface.
Milling Cutters are ideal for the removal of plastic road markings without penetrating the surface.

  • TFP 200 Gas
  • TFP 200 Electric
  • TFP 200 Pneumatic
  • Accessories
Model Number 320.2000T
Production Rate – 300 sq. ft./hour
Cutter life – 10,500 sq. ft.
   
Motor Specifications
Max Cutting Depth
per Pass
Cutting
Width
Dimensions
(WxLxH)
Weight
(lbs.)
Honda GX160 Gas, 5.5 HP1/8"8"14" x 35" x 35"130

Model Number 320.2004T
Production Rate – 300 sq. ft./hour
Cutter life – 10,500 sq. ft.
   
Motor Specifications
Max Cutting Depth
per Pass
Cutting
Width
Dimensions
(WxLxH)
Weight
(lbs.)
230V, 50/60 Hz, 1 Phase, 3 HP1/8"8"14" x 35" x 35"149

Model Number 320.2012T
Production Rate – 300 sq. ft./hour
Cutter life – 10,500 sq. ft.
   
Motor Specifications
Max Cutting Depth
per Pass
Cutting
Width
Dimensions
(WxLxH)
Weight
(lbs.)
165CFM @ 90 PSI, 3.5 HP1/8"8"14" x 35" x 35"99

TFP 200 Cutters
 Individual
Cutter
Cutters/Spacers Required
Per Drum
Drum Assembly
Wire BrushesN/AN/A320.9620
Beam Cutters320.5120226 Pieces320.1020SB
Star Cutters320.3658208 Pieces320.1020SS
TCT Cutters
and Spacers
320.5500
320.4140
80 Pieces
88 Pieces
320.1020ST
Milling Cutters
(22mm)
320.560024 Pieces320.1020SM
TCT Cutters
(for grooving)
and Spacers
320.5500
320.4140
24 Pieces
232 Pieces
320.002G


Shortcuts:Downloads: