ESD 162 Dry Core Drill

SOFT IMPACT DRY DIAMOND DRILLING up to 8" Diameter

  • ESD 162 Main Tool Image 1
  • ESD 162 Application Image 1
  • ESD 162 Application Image 2
  • ESD 162 drill with BST 162 H stand
  • ESD 162 Main Tool Image 1
  • ESD 162 Application Image 1
  • ESD 162 Application Image 2
  • ESD 162 drill with BST 162 H stand
  • NEW powerful innovation in core drilling, hand held dry core drill with a 19.5 Amp, 110 V, dry core drill motor.
  • IHT soft impact system enables an optimized, high-frequency impact impulse output for faster drilling with high speed at 1000 RPM. 
  • Soft impact diamond core drill works for drilling up to 8" in brick/block and concrete up to 6-3/8"
  • Ergonomic design and anti-vibration handles for hand or rig guided drilling.
  • Use in environments where wet drilling is not possible, dust extraction system included.
Request a Quote
Bits for the ESD 162
Max. Hole
Dia.
Speeds
Use
Weight
Power
Diamond Core Drill Bit
Core Drill Gears
Core Drill Weight
Core Drill Power
Ø 8"
0-1000 RPM
Hand-Held
or Rig-Mounted
15 lbs.
19.5 Amp / 110 V

The newly engineered soft percussion dry core drill!

Features:

  • 19.5 Amp, 110 V, dry core drill motor.
  • Hand held or rig-mounted dry drilling
  • Soft impact dry diamond core drill works on extremely hard materials.
  • IHT soft impact system enables an optimized, high-frequency impact impulse output for faster drilling. 
  • Dry drilling up to 8" in brick/block
  • Dry core drilling concrete up to 6-3/8"
  • High speeds, load speed 0-1000 RPM.
  • Ergonomic design and anti-vibration handles.

Model ESD 162 is a Dry Diamond Core Drill with a Dust Extraction Port built directly into the spindle. It easily connects to a vacuum for dust extraction. The drill stand mount allows the operator to switch from hand-held to stand-mounted drilling quickly. The drill stand is adjustable up to 45°. Core drill includes drill bit connections 5/8" x 11 UNC and 1-1/4" x 7 UNC.
 
Optional accessories include anchor stand (with or without vacuum pump) and centering aid.
 

Use:

  • Dry drilling in reinforced concrete, highly compacted sand-lime brick, masonry, and other hard materials
  • Ideal for on-site conditions that don't allow wet drilling (hollow ceilings, etc.)
ETN 162/3 Adapter
​		 

  • FEATURES
  • SPECIFICATIONS
  • ESD 162 POSA
  • VIDEO
  • Extremely fast drilling up to 6-3/8” dia. in reinforced concrete, and 8” dia. in brick/ block
  • High drilling speeds of up to 1000 RPM
  • Eliminate the hassle of wet drilling (water tanks & cans) while eliminating electrical hazards
  • Specially designed IHT soft impact system to enable an optimized, high-frequency impact impulse output for faster drilling
  • Can be used for hand or rig-guided drilling of wall and ceiling openings in sanitary, heating, and ventilation construction
  • EDMC Pro – digital motor control with service and overload indicator, soft start, over-current cut-off
  • Efficient dust extraction of health-hazardous mineral dust
  • Connection for centering rod
  • Specially engineered diamond drill bit allows for fast, and cool cutting while providing increased longevity
Power input19.5 Amp
Rated Voltage110 V
Load Speeds (RPM)0-1000 RPM
Drilling Diameter6-3/8" / 8"
Spindle Connection1-1/4"x7 UNC
5/8"x11 UNC
Collar Diameter60 mm
Weight15 lbs (motor only)
Supplied InA molded carrying case with dust
extraction port & 5/8" x 11 UNC adapter
Power input19.5 Amp
Rated Voltage110 V
Load Speeds (RPM)0-1000 RPM
Drilling Diameter6-3/8" / 8"
Spindle Connection1-1/4"x7 UNC
5/8"x11 UNC
Collar Diameter60 mm
Weight15 lbs (motor only)
Supplied ESD 162 + BST 162 H Drill Stand

 
SHORTCUTS:DOWNLOADS: