Drift Pin, Straight Type

Non-sparking drift pin for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
Non-magnetic drift pin for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
Corrosion Resistant drift pin for use in desalination plants, chemical/paper manufacturing, and shipyards.

When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex301C-015UA	Ex301C-015UB

No.	a inch	b inch	l inch	Wt. lbs.
Ex301C-005U*	1/16	3/8	6	0.17
Ex301C-010U*	1/8	3/8	6	0.18
Ex301C-015U	3/16	3/8	6	0.19
Ex301C-020U	1/4	3/8	6	0.19
Ex301C-025U	5/16	7/16	6	0.28
Ex301C-030U	3/8	9/16	6	0.38
Ex301C-035U	7/16	5/8	6	0.51
Ex301C-040U	1/2	11/16	6	0.65
Ex301C-045U	9/16	11/16	6	0.66
Ex301C-050U	5/8	3/4	8	1.10
Ex301C-055U	11/16	7/8	8	1.32
Ex301C-060U	3/4	15/16	10	1.97
Ex301C-065U	13/16	1	10	2.32
Ex301C-070U	7/8	1	10	2.35
Ex301C-075U	15/16	1-1/16	10	2.50
Ex301C-085U	1-1/16	1-1/4	11	3.23
Ex301C-095U	1-3/16	1-5/16	11	3.40

* Copper Beryllium (CuBe) only

When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex301C-5A	Ex301C-5B

No.	a inch	b inch	l inch	Wt. lbs.
Ex301C-1.5*	1.5	10	150	0.08
Ex301C-2*	2	10	150	0.08
Ex301C-3*	3	10	150	0.08
Ex301C-4*	4	10	150	0.08
Ex301C-5	5	10	150	0.08
Ex301C-6	6	10	150	0.09
Ex301C-7	7	12	150	0.13
Ex301C-8	8	12	150	0.13
Ex301C-9	9	14	150	0.17
Ex301C-10	10	14	150	0.18
Ex301C-11	11	16	150	0.23
Ex301C-12	12	16	150	0.23
Ex301C-13	13	18	150	0.29
Ex301C-14	14	18	150	0.30
Ex301C-15	15	20	200	0.49
Ex301C-16	16	20	200	0.50
Ex301C-17	17	22	200	0.60
Ex301C-18	18	22	200	0.61
Ex301C-19	19	24	250	0.89
Ex301C-20	20	24	250	0.91
Ex301C-21	21	26	250	1.05
Ex301C-22	22	26	250	1.07

* Copper Beryllium (CuBe) only

How to Choose the Correct Alloy for Your Application
	Aluminum-Bronze (AlBr) Alloy	Copper-Beryllium (CuBe₂) Alloy
Zone Compatibility	Fulfill demand in ATEX Directive 94/9/EC for work in Zones 1, 2, 21 and 22	Fulfill demand in ATEX Directive 94/9/EC for work in Zones 0, 1, 2, 20, 21 and 22
Hardness	27 HRC	38 HRC
Durability	Not as durable as CuBe.	Very durable due to high hardness and tensile strength.
Magnetic Properties	Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.	Non-ferrous components; safer for applications demanding non-magnetic properties.
Composition	Al: 10.3% Fe: 4.5% Ni: 4.5% Other: 0.5% Cu: Balance	Be: 1.9% Co + Ni: 0.4% Other: 0.5% Cu: Balance

Use Guidelines
Proper Use	Misuse
Drift pins are designed for aligning holes in metal.	Never use a drift pin as a punch. Never strike a drift pin if either end is chipped or mushroomed.