Deep Impact Sockets, 6-Point, 1-1/2" Drive

Ex1860 Series

  • Ex1860 Deep Impact Sockets, 6-Point, 1-1/2" Drive
  • Ex1860 Deep Impact Sockets, 6-Point, 1-1/2" Drive Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex1860 Deep Impact Sockets, 6-Point, 1-1/2" Drive
  • Ex1860 Deep Impact Sockets, 6-Point, 1-1/2" Drive Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2008 certified production, TUV materials certified
  • Lifetime Warranty

Applications:

  • Non-sparking deep impact sockets for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic deep impact sockets for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant deep impact sockets for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • Metric Sizes
  • Alloys & Use
No.
a
inch
s
inch
Ex1860-005UB11-7/16
Ex1860-010UB11-5/8
Ex1860-015UB11-13/16
Ex1860-017UB11-7/8
Ex1860-020UB12
Ex1860-023UB12-1/4
Ex1860-025UB12-3/16
Ex1860-030UB12-3/8
Ex1860-035UB12-9/16
Ex1860-040UB12-3/4
Copper Beryllium (CuBe) only
No.
a
inch
s
mm
Ex1860-36B136
Ex1860-41B141
Ex1860-46B146
Ex1860-50B150
Ex1860-55B155
Ex1860-60B160
Ex1860-65B165
Ex1860-70B170
Copper Beryllium (CuBe) only
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 94/9/EC for work in Zones 1, 2, 21 and 22Fulfill demand in ATEX Directive 94/9/EC for work in Zones 0, 1, 2, 20, 21 and 22
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance
Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance
 
Use Guidelines
Proper UseMisuse
Socket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1/4" to 1". Drive size is a measure of capacity.
Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.
Never use a pipe extension or other form
of "cheater" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut.
If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness.
Hand Sockets should never be used on power drive or impact wrenches.

Downloads: