Deep Impact Sockets, 6-Point, 3/8" Drive

Ex1820 Series

Non-Sparking
Non-Magnetic
Corrosion Resistant
Non-Marring*
TUV & ISO 9001:2015 Production Certified
Lifetime Warranty

Applications:

Non-sparking 6-point deep impact sockets for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
Non-magnetic 6-point deep impact sockets for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
Corrosion Resistant 6-point deep impact sockets for use in desalination plants, chemical/paper manufacturing, and shipyards.
Non-marring* 6-point deep impact sockets for mechanical applications.

Standard Sizes
Metric Sizes
Alloys & Use

No.	a inch	s inch	Bolt Clearance Depth Inch	Hex Depth Inch
Ex1820-005UB	3/8	1/4	1.85	0.67
Ex1820-010UB	3/8	5/16	1.85	0.67
Ex1820-015UB	3/8	3/8	2.05	0.67
Ex1820-020UB	3/8	7/16	2.05	0.67
Ex1820-025UB	3/8	1/2	2.05	0.67
Ex1820-030UB	3/8	9/16	2.05	0.67
Ex1820-035UB	3/8	5/8	2.25	0.87
Ex1820-040UB	3/8	11/16	2.25	0.87
Ex1820-045UB	3/8	3/4	2.25	0.87

Copper Beryllium (CuBe) only

No.	a inch	s mm	Bolt Clearance Depth mm	Hex Depth mm
Ex1820-7B	3/8	7	47	17
Ex1820-8B	3/8	8	47	17
Ex1820-9B	3/8	9	52	17
Ex1820-10B	3/8	10	52	17
Ex1820-11B	3/8	11	52	17
Ex1820-12B	3/8	12	52	17
Ex1820-13B	3/8	13	52	17
Ex1820-14B	3/8	14	52	17
Ex1820-15B	3/8	15	57	22
Ex1820-16B	3/8	16	57	22
Ex1820-17B	3/8	17	57	22
Ex1820-18B	3/8	18	57	22
Ex1820-19B	3/8	19	57	22

Copper Beryllium (CuBe) only

How to Choose the Correct Alloy for Your Application
	Aluminum-Bronze (AlBr) Alloy	Copper-Beryllium (CuBe₂) Alloy
Zone Compatibility	Fulfill demand in ATEX Directive 94/9/EC for work in Zones 1, 2, 21 and 22	Fulfill demand in ATEX Directive 94/9/EC for work in Zones 0, 1, 2, 20, 21 and 22
Hardness	27 HRC	38 HRC
Durability	Not as durable as CuBe.	Very durable due to high hardness and tensile strength.
Magnetic Properties	Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.	Non-ferrous components; safer for applications demanding non-magnetic properties.
Composition	Al: 10.3% Fe: 4.5% Ni: 4.5% Other: 0.5% Cu: Balance	Be: 1.9% Co + Ni: 0.4% Other: 0.5% Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here

* non-marring properties when used on metals harder than tool alloy composition. For Rockwell hardness values see alloy information in the alloy information tab above.