Angle Tracing Point

Ex1302 Series

  • Ex1302 Non-Sparking, Non-Magnetic Angle Tracing Point
  • Ex1302 Non-Sparking, Non-Magnetic Angle Tracing Point Dimensions
  • Lifetime warranty Non-sparking Tools
  • Ex1302 Non-Sparking, Non-Magnetic Angle Tracing Point
  • Ex1302 Non-Sparking, Non-Magnetic Angle Tracing Point Dimensions
  • Lifetime warranty Non-sparking Tools
  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty
Request a Quote
View Our ATEX Power Tools

Applications:

  • Non-sparking angle tracing point for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic angle tracing point for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant angle tracing point for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex1302-300AEx1302-300B
No.Materials
inch		l1
inch		l2
inch		Wt.
lbs.		s
mm		l1
mm		l2
mm		Wt.
kg
Ex1302-300AAluminum Bronze5/84-5/8121.28161163000.58
Ex1302-300BCopper Beryllium5/84-5/8121.28161163000.58
Ex1302-500AAluminum Bronze5/84-5/8202.11161165000.96
Ex1302-500BCopper Beryllium5/84-5/8202.11161165000.96
Ex1302-600AAluminum Bronze5/85-9/16243.93201406001.78
Ex1302-600BCopper Beryllium5/85-9/16243.93201406001.78
Ex1302-800AAluminum Bronze3/46-7/16326.30221628002.86
Ex1302-800BCopper Beryllium3/46-7/16326.30221628002.86
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance		Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
Bars are heavy steel tools used to lift and move heavy objects
and to pry where leverage is needed. They are also used to
remove nails and spikes during wrecking operations.		Never use like a striking tool or pound like a chisel. They
should not be struck against metal, stone, or concrete. Do
not add extensions or stand on bar for extra leverage. Do
not use cracked or deformed bars.

Downloads: