Concrete Scarifier Drums & Deck Crawler Drums
Drums & Drum Assemblies - From 2" to 10" Cutting Widths
CS Unitec scarifier/deck crawler drums are engineered to handle the most demanding concrete scarifying, planing and metal deck scaling applications.
Find below our wide range of drum sizes and cutter assemblies to fit, 2", 4", 8" and 10" cutting width Scarifiers. All CS Unitec scarifiers are supplied with a drum and cutter assembly pre-mounted, get right to work, save time and increase productivity. Our walk-behind scarifiers also include a quick mounting drum system for easy drum change-out.
Benefits:
- High Durability:
- Robust webbed and double-webbed drum designs
- Up to 5/8" thick cutting shafts
- Economical:
- Engineered for long-life and continuous use
- Simple operation and low-maintenance
| - Increased Safety:
- Quick-mounting side-access drum system for all floor model scarifiers. Reduces the risk of hand and impact injuries.
- Productivity & Versatility:
- Up to 1/4" of removal per pass
- Engineered for high-production and removal rates
- Over 6 different cutter/grinding teeth options (For CSP 1, 3-9)
- Quick mounting system for easy drum changeout on all floor models
- Use on concrete, asphalt, stone, metal, and more
|
Applications:
- Removal of coatings, epoxies, paint, traffic lines/parking lot lines, thermoplastics, carpet adhesives, and more.
- Leveling concrete, asphalt, and stone. Reduce sidewalk heaves/trip hazards and level high spots.
- Creating keyed, grooved profiles, or non-slip surfaces; including grooving concrete for cattle farms.
- Also for use on steel and metal surfaces to remove paint, rust, scale, and more.
- Roughening and planing concrete, asphalt & stone.
- Create Concrete Surface Profiles from 1 to 10. Learn more below.

- Hand-Held Scarifier Drums
- For TFP 200 (8" Scarifiers)
- For TFP 260 (10" Scarifiers)
| Model Number | Description | For Model: | IMPA | ISSA |
---|
320.002H | 8" Wide Drum Assembly | TFP 200 | 59.22.47 | 55.096.16 | Applications: With cutter and brush accessories create a wide range of surface profiles. Remove cocrete, paint, corrosion and more. | Included Components: Drum, (4) 1/2" Shafts |
|
| Model Number | Description | For Model: | IMPA | ISSA |
---|
320.060G | 8" Wide Re-enforced Grooving Drum Assembly | TFP 200 | N/A | N/A | Applications: With TCT cutters create grooved profiles in concrete for non-slip sufacing and drainage channels. | Included Components: Re-enforced Grooving Drum, (4) 1/2" Shafts |
|
| Model Number | Description | For Model: | IMPA | ISSA |
---|
320.0020 | (4) 8" Wide Cutter Shafts | TFP 200 | 59.22.49 | 55.096.18 | Included Components: (4) 1/2" Shafts |
|
| Model Number | Description | For Models | IMPA | ISSA |
---|
320.1020ST | 8" Wide Drum Assembly with TCT Cutters | TFP 200 | N/A | N/A | Applications: For creating a heavy surface profiles CSP ratings 6-9. Reduce, remove, and roughen concrete, coatings, corrosion and more. | Included Components: Drum, (4) 1/2" Shafts, 80 TCT Cutters & 88 Spacers |
|
| Model Number | Description | For Models | IMPA | ISSA |
---|
320.1020G | 8" Wide Double-Enforced Drum Assembly with TCT Cutters | TFP 200 | N/A | N/A | Applications: For creating grooved profiles in concrete for non-slip sufacing and drainage channels. | Included Components: Re-Enforced Grooving Drum, (4) 1/2" Shafts, 20 TCT Cutters & 196 Spacers |
|
| Model Number | Description | For Model: | IMPA | ISSA |
---|
320.1020SS | 8" Wide Drum Assembly with Star Cutters | TFP 200 | N/A | N/A | Applications: For creating medium surface profiles CSP ratings 4-5. Reduce, remove, and roughen concrete, laitance, paint, coatings, corrosion and more. | Included Components: Drum, (4) 1/2" Shafts, 264 Star Cutters |
|
| Model Number | Description | For Model: | IMPA | ISSA |
---|
320.1020SB | 8" Wide Drum Assembly with Beam Cutters | TFP 200 | N/A | N/A | Applications: For creating a light surface profile CSP rating 3-4. Reduce, remove, and roughen concrete. Remove coatings, lataince, grease, dirt, corrosion, ice and more. | Included Components: Drum, (4) 1/2" Shafts, 264 Beam Cutters |
|
| Model Number | Description | For Models: | IMPA | ISSA |
---|
320.1020SM | 8" Wide Re-enforced Drum Assembly with Milling Cutters | TFP 200 | N/A | N/A | Applications: For removing thick and soft materials such as thermoplastics, mastic, waterproofing membraines, glues, plastics and similar. Leaves a light surface profile CSP ratings 3-4. | Included Components: Double-Enforced Drum, (4) 1/2" Shafts, 28 Milling Cutters |
|
| Model Number | Description | For Models: | CSP Rating | IMPA | ISSA |
---|
320.9620 | 8" Wide Drum Twisted Knot Wire Brush Assembly | TFP 200 | 1 (Fine Profile) | 59.22.45 | 55.096.13 | Included Components: Consists of Drum & 21 Twisted Wire Brush Segments |
|
| Model Number | Description | For Models: | CSP Rating | IMPA | ISSA |
---|
320.9610 | 8" Wide Drum Crimped Wire Brush Assembly | TFP 200 | 1 (Fine Profile) | 59.22.44 | 55.096.14 | Included Components: Consists of Drum & 14 Crimped Wire Brush Segments |
|
| Model Number | Description | For Model: | IMPA | ISSA |
---|
326.06DW | 10" Wide Double-Enforced Drum Assembly | TFP 260 | N/A | N/A | Applications: With cutter accessories create a wide range of surface profiles. Remove cocrete, paint, corrosion and more. | Included Components: Double-Enforced Drum, (6) 5/8" Shafts |
|
| Model Number | Description | For Model: | IMPA | ISSA |
---|
326.060G | 10" Wide Re-enforced Grooving Drum Assembly | TFP 260 | N/A | N/A | Applications: With TCT cutters create grooved profiles in concrete for non-slip sufacing and drainage channels. | Included Components: Re-enforced Grooving Drum, (6) 5/8" Shafts |
|
| Model Number | Description | For Model: | IMPA | ISSA |
---|
326.0016 | (6) 10" Wide Cutter Industrial Shafts | TFP 200 | N/A | N/A | Included Components: (6) 5/8" Shafts |
|
| Model Number | Description | For Models | IMPA | ISSA |
---|
326.1016ST | 10" Wide Double-Enforced Drum Assembly with TCT Cutters | TFP 260 | N/A | N/A | Applications: For creating a heavy surface profiles CSP ratings 6-9. Reduce, remove, and roughen concrete, coatings, corrosion and more. | Included Components: Double-Enforced Drum, (6) 5/8" Shafts, 123 TCT Cutters & 129 Spacers |
|
| Model Number | Description | For Models | IMPA | ISSA |
---|
326.1016GT | 10" Wide Re-Enforced Drum Assembly with TCT Cutters | TFP 260 | N/A | N/A | Applications: For creating grooved profiles in concrete for non-slip sufacing and drainage channels. | Included Components: 4x Enforced Grooving Drum, (6) 5/8" Shafts, 36 TCT Cutters & 224 Spacers |
|
| Model Number | Description | For Model: | IMPA | ISSA |
---|
326.1016DS | 10" Wide Double-Enforced Drum Assembly with Star Cutters | TFP 260 | N/A | N/A | Applications: For creating medium surface profiles CSP ratings 4-5. Reduce, remove, and roughen concrete, coatings, corrosion and more. | Included Components: Double-Enforced Drum, (6) 5/8" Shafts, 342 Star Cutters |
|
| Model Number | Description | For Model: | IMPA | ISSA |
---|
326.1016DS | 10" Wide Double-Enforced Drum Assembly with Beam Cutters | TFP 260 | N/A | N/A | Applications: For creating a light surface profile CSP ratings 3-4. Reduce, remove, and roughen concrete, coatings, corrosion and more. | Included Components: Double-Enforced Drum, (6) 5/8" Shafts, 332 Beam Cutters |
|
| Model Number | Description | For Models: | IMPA | ISSA |
---|
326.1016DM | 10" Wide Double-Enforced Drum Assembly with Milling Cutters | TFP 260 | N/A | N/A | Applications: For removing thick and soft materials such as thermoplastics, mastic, waterproofing membraines, glues, plastics and similar. Leaves a light surface profile CSP ratings 3-4. | Included Components: Double-Enforced Drum, (6) 5/8" Shafts, 60 Milling Cutters |
|