Model 2 1327 0010 SA

Max. Hole Dia.	Gears	Use	Weight	Power
Ø 12"	3	Rig-Mounted	69 lbs.	Hydraulic - 4.2 HP 6 GPM @ 2000 PSI

Industry's first 3-speed rig-mounted Hydraulic Core Drill for holes up to 12" dia.

This powerful wet diamond core drill is designed for fast, accurate drilling in concrete, reinforced concrete and other masonry materials. Sealed 3-speed gearbox with permanent oil bath lubrication.

The hydraulic motor operates at 2000 PSI oil pressure. The required flow is 6 GPM. Additional flow is automatically by-passed back to the tank up to a maximum input of 13 GPM.

The hydraulic core drill incorporates a safety slip clutch and water swivel. 5/8" x 11 UNC and 1-1/4" x 7 UNC and G 1/2" connecting threads are standard. 1/2" hose diameter with 3/8" FF (HTMA) couplings.

• 2 1327 0010 SA
• 2 1327 0010 SV
• Standard Equipment
• Accessories

Motor Power	4.2 HP
Max. Drilling Dia.	12"
Free Speed (RPM)	380 / 900 / 1800
Connecting Threads	1-1/4"x7 UNC Male G 1/2" Female Optional: 5/8"x11 UNC Male
Oil Flow / 2000 PSI	6 GPM
Hose Diameter	1/2" ID Hose with 3/8" FF (HTMA) Couplings
Water Connection	3/4" Gardena system (included)
Weight (lbs.)	69
Stand	Rig Mounted Core Drill w/ Anchor Stand - BST 300

Motor Power	4.2 HP
Max. Drilling Dia.	12"
Free Speed (RPM)	380 / 900 / 1800
Connecting Threads	1-1/4"x7 UNC Male G 1/2" Female Optional: 5/8"x11 UNC Male
Oil Flow / 2000 PSI	6 GPM
Hose Diameter	1/2" ID Hose with 3/8" FF (HTMA) Couplings
Water Connection	3/4" Gardena system (included)
Weight (lbs.)	82
Stand	Rig Mounted Core Drill w/ Combination Anchor/Vacuum Stand (BST 300 V) and Vacuum Pump (P/N 253 511)

• Heat-treated Gears
• Safety Friction Slip Clutch

 

All Accessories Core Drill Stands Diamond Core Drill Bits Carbide-Tipped Plate Cutters Adapters Centering Devices Copper Ring Core Bit Extension Rods and Chuck for Rebar Cutters Portable Water Tank Sharpening Block and Plate Water Collection Rings