ATEX Certified Vibro-Lo™ Low-Vibration Chisel Scalers
High performance and low vibration for greater productivity and improved operator comfort
Features:
- ATEX Certified for working in hazardous environments and Ex Zones
- VL-EX Chisel Scalers provide the safest option for surface preparation
- Integrated Vibro-Lo™ vibration reduction technology reduces vibration levels bu more than 8 times
- Lightweight, easy to handle
- Tool-free chisel changeover
Specially designed for use in hazardous environments and Ex Zones
These specially engineered Trelawny chisel scalers are fully certified to the ATEX classification: EX II 2 G EX H IIC T4 GB under the European Directive 94/9/EC
Ideal for working in hazardous applications including Gas Zone 1 and Dust Zone 21.
High power with 8x less vibration – equipped with Vibro-Lo™
CS Unitec's Trelawny™ line of Low-Vibration needle/chisel scalers offer high performance and low vibration for greater productivity and improved operator comfort. Ergonomically designed with low maintenance and quick change tooling option.
CS Unitec's Trelawny™ Vibro-Lo™ line of Needle/Chisel Scalers operate with 8x less vibration than standard models. These tools utilize vibration damping components to offset the hammer vibration created when the needles/chisels impact the workpiece.
Applications Include:
- Cleaning and stress-relieving weld seams and joints
- Removing coatings, corrosion and other accumulated materials
- Splitting, chipping, pointing and brick raking
- Specifications
- Chisels
- Drop Protection
Grip | Description | Model No. | Weight (lbs.) | Blows per Minute | CFM @ 90 PSI | Noise Level dB(a) | Vibration Levels m/s2 | Vibro-Lo™ | ATEX Classification |
---|---|---|---|---|---|---|---|---|---|
Inline | VL223Ex Chisel Scaler | 196.2117 | 6.5 | 2400 | 4 | 76.3 | 3.69 | Yes | EX II 2 G EX H IIC T4 GB / EX II 2 D EX H IIIC T135 C DB |
Pistol | VL203Ex Chisel Scaler | 199.2217 | 7 | 2400 | 4 | 76.3 | 3.33 | Yes | EX II 2 G EX H IIC T4 GB / EX II 2 D EX H IIIC T135 C DB |
Pistol | VL303Ex Chisel Scaler | 199.3017 | 9.5 | 3000 | 5.5 | 78.2 | 3.7 | Yes | EX II 2 G EX H IIC T4 GB / EX II 2 D EX H IIIC T135 C DB |
Chisel Part No. | Shank | Length | Width | Application | ||
---|---|---|---|---|---|---|
![]() | 704.3110 | Square | 7" | 2" | Spark-resistant Aluminum Bronze for use in hazardous areas / Ex Zones | ![]() |
![]() | 704.3205 | Square Cranked End | 7" | 1/2" | Weld flux and thick coating removal | |
![]() | 704.3101 | Square | 7" | 3/4" | Weld splatter removal | |
![]() | 704.3103 | Square | 7" | 2-1/2" | Wide flat chisel for the removal of rust or peeling paint | |
![]() | 704.3107 | Square | 10" | 3/4" | Flat chisel for weld splatter and sand cast cleaning |
VL 203 Drop Protection Kit - Part Number 720.2003 VL303 Drop Protection Kit - Part Number 720.3003 | |||
---|---|---|---|
![]() | CS Unitec offers a drop protection kit for our Vibro-Lo™ Needle/ Chisel Scalers. Protect your investment when working at heights or in applications where dropping/ losing the tool is likely, including: offshore platforms and rigs, bridges/ scaffolding, vessels and ships. * Safety clip and line not supplied | ![]() |
SHORTCUTS: | DOWNLOADS: |
---|---|