Diamond Point Chisel

Ex307 Series

  • Ex307 Non-Sparking, Non-Magnetic Diamond Point Chisel
  • Ex307 Non-Sparking, Non-Magnetic Diamond Point Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex307 Non-Sparking, Non-Magnetic Diamond Point Chisel
  • Ex307 Non-Sparking, Non-Magnetic Diamond Point Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty
Request a Quote
View Our ATEX Power Tools

Applications:

  • Non-sparking diamond point chisel for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic diamond point chisel for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant diamond point chisel for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex307-200AEx307-200B
No.Material
s
inch
l
inch
Wt.
lbs.
s
mm
l
mm
Wt.
kg
Ex307-200A
Aluminum Bronze
9/1680.58
14
2000.26
Ex307-200B
Copper Beryllium
9/1680.58
14
2000.26
Ex307-250AAluminum Bronze5/8100.94162500.43
Ex307-250BCopper Beryllium5/8100.94162500.43
Ex307-300AAluminum Bronze11/16121.44183000.65
Ex307-300BCopper Beryllium11/16121.44183000.65
Ex307-400AAluminum Bronze3/4162.41204001.09
Ex307-400BCopper Beryllium3/4162.41204001.09
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance		Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
Chisels have a cutting edge at one end for cutting,
shaping and removing metal softer than the cutting edge itself
such as cast iron, wrought iron, steel, bronze, copper, etc. and
a struck face on the opposite end.		Never use chisels for cutting or splitting stone or
concrete. Never use a dull chisel or one with a
mushroomed
head. Never use a chisel with a loose or
damaged handle.

Downloads: