Pneumatic Chisel

Ex310AH Series

  • Ex310AH Non-Sparking, Non-Magnetic Pneumatic Chisel
  • Ex310AH Non-Sparking, Non-Magnetic Pneumatic Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex310AH Non-Sparking, Non-Magnetic Pneumatic Chisel
  • Ex310AH Non-Sparking, Non-Magnetic Pneumatic Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2008 certified production, TUV materials certified
  • Lifetime Warranty
Request a Quote
View Our ATEX Power Tools

Applications:

  • Non-sparking pneumatic chisel for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic pneumatic chisel for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant pneumatic chisel for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex310AH-32AEx310AH-32B
No.Material
b
inch
l1
inch
l2
inch
Wt.
lbs.
b
mm
Wt.
kg
Shank
Ex310AH-32A
Aluminum
Bronze
1-1/41-1/25-5/80.49320.22
.401 round collar,
round shank
Ex310AH-32B
Copper
Beryllium
1-1/41-1/25-5/80.49320.22
.401 round collar,
round shank
Ex310AH-50AAluminum
Bronze		21-1/25-5/80.49500.22.401 round collar,
round shank
Ex310AH-50BCopper
Beryllium		21-1/25-5/80.49500.22.401 round collar,
round shank

 

How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 94/9/EC for work in Zones 1, 2, 21 and 22Fulfill demand in ATEX Directive 94/9/EC for work in Zones 0, 1, 2, 20, 21 and 22
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance		Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
Chisels have a cutting edge at one end for cutting,
shaping and removing metal softer than the cutting edge itself
such as cast iron, wrought iron, steel, bronze, copper, etc. and
a struck face on the opposite end.		Never use chisels for cutting or splitting stone or
concrete. Never use a dull chisel or one with a
mushroomed
head. Never use a chisel with a loose or
damaged handle.

Downloads: