Plastic Hammer

Ex121 Series

  • Ex121 Plastic Hammer
  • Ex121 Plastic Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex121 Plastic Hammer
  • Ex121 Plastic Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty

Hammer handle appearance may vary from photos shown.

Request a Quote
View Our ATEX Power Tools

Applications:

  • Non-sparking plastic hammer for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic plastic hammer for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant plastic hammer for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex121-0100AEx121-0100B
No.H
lbs.		H
kg		Handle Length
Ex121-01001.000.4514"/355mm
Ex121-02202.201.014"/355mm
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance		Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
Soft face hammers are intended for striking blows where steel hammers would mar or damage the surface of the work.  Rubber and plastic hammers are used for setting stone.Never use these tools to drive nails or screws or to strike sharp metal objects. Never use a hammer or mallet with loose or damaged handle.

Downloads: