Sledge Hammer

Ex104U Series

  • Ex104U Sledge Hammer
  • Ex104U Sledge Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex104U Sledge Hammer
  • Ex104U Sledge Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty

Hammer handle appearance may vary from photos shown.

Request a Quote
View Our ATEX Power Tools

Applications:

  • Non-sparking sledge hammer for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic sledge hammer for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant sledge hammer for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex104U-0200AEx104U-0200B
No.H
lbs.		H
kg		Handle Length
Ex104U-02002.000.919.75"/ 245mm
Ex104U-03003.001.3615"/ 380mm
Ex104U-04004.001.8115"/ 380mm
Ex104U-05005.002.2733"/ 840mm
Ex104U-07507.503.4033"/ 840mm
Ex104U-100010.004.5433"/ 840mm
Ex104U-120012.005.4433"/ 840mm
Ex104U-150015.006.8033"/ 840mm
Ex104U-180018.008.1733"/ 840mm
Ex104U-220022.009.9833"/ 840mm
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
                Fe: 4.5%
                Ni: 4.5%
                Other: 0.5%
                Cu: Balance		Be: 1.9%
                Co + Ni: 0.4%
                Other: 0.5%
                Cu: Balance

    For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
The striking face is designed for general blacksmith work in
striking unhardened metal. The peins are used for shaping
(fullering) and bending unhardened metal.		Never use a sledge to strike a hammer, sledge or maul.
Never use a sledge with loose or damaged handle.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Downloads: