Striking Box Wrench, 12-Point, Offset

Non-sparking striking box wrench for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
Non-magnetic striking box wrench for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
Corrosion Resistant striking box wrench for use in desalination plants, chemical/paper manufacturing, and shipyards.

When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex201F-003UA	Ex201F-003UB

No.	S inch	l inch	Wt. lbs.
Ex201F-003U	7/8	10-3/4	1.65
Ex201F-004U	1	10-3/4	1.65
Ex201F-005U	1-1/16	10-3/4	1.65
Ex201F-007U	1-1/8	10-3/4	1.81
Ex201F-010U	1-3/16	10-3/4	1.81
Ex201F-015U	1-1/4	10 3/4	1.81
Ex201F-017U	1-5/16	11-3/16	2.87
Ex201F-018U	1-3/8	11-3/16	2.87
Ex201F-020U	1-7/16	11-3/16	2.87
Ex201F-022U	1-1/2	12-3/8	2.98
Ex201F-025U	1-5/8	12-3/8	2.98
Ex201F-027U	1-11/16	12-3/8	2.98
Ex201F-028U	1-3/4	12-3/4	4.19
Ex201F-030U	1-13/16	12-3/4	4.19
Ex201F-032U	1-7/8	13-3/16	4.67
Ex201F-035U	2	13-3/16	4.67
Ex201F-040U	2-3/16	13-9/16	5.56
Ex201F-045U	2-3/8	14-3/16	6.64
Ex201F-050U	2-9/16	15-3/16	7.83
Ex201F-055U	2-3/4	16	9.48

When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex201F-27A	Ex201F-27B

No.	S mm	l mm	Wt. kg
Ex201F-27	27	245	0.75
Ex201F-30	30	270	0.82
Ex201F-32	32	270	0.82
Ex201F-36	36	280	1.30
Ex201F-41	41	310	1.35
Ex201F-46	46	320	1.90
Ex201F-50	50	330	2.12
Ex201F-55	55	340	2.52
Ex201F-60	60	355	3.01
Ex201F-65	65	380	3.55
Ex201F-70	70	400	4.30

How to Choose the Correct Alloy for Your Application
	Aluminum-Bronze (AlBr) Alloy	Copper-Beryllium (CuBe₂) Alloy
Zone Compatibility	Fulfill demand in ATEX Directive 94/9/EC for work in Zones 1, 2, 21 and 22	Fulfill demand in ATEX Directive 94/9/EC for work in Zones 0, 1, 2, 20, 21 and 22
Hardness	27 HRC	38 HRC
Durability	Not as durable as CuBe.	Very durable due to high hardness and tensile strength.
Magnetic Properties	Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.	Non-ferrous components; safer for applications demanding non-magnetic properties.
Composition	Al: 10.3% Fe: 4.5% Ni: 4.5% Other: 0.5% Cu: Balance	Be: 1.9% Co + Ni: 0.4% Other: 0.5% Cu: Balance

Use Guidelines
Proper Use	Misuse
Box wrenches in the regular pattern are designed for general service. The Heavy- Duty and Striking Face patterns are designed for the service indicated. The Electronic Hex Box patterns are designed for the lighter service encountered in electronic, carburetor and ignition work. Ratcheting Box and split box wrenches are for light duty and should not be used in heavy-duty applications.	Never use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.