PTX TZ-Pyramid Belt (closed)

Remove scratches, roller scale and spot welds

  • PTX TZ-Pyramid Trizact Belts (closed)
  • PTX TZ-Pyramid Trizact Belt (closed)
  • PTX TZ-Pyramid Belt Trizact close-up of grain
  • PTX TZ-Pyramid Trizact Belts (closed)
  • PTX TZ-Pyramid Trizact Belt (closed)
  • PTX TZ-Pyramid Belt Trizact close-up of grain
  • New abrasive fabric with pyramid-shaped grit structure for removing scratches, roller scale and spot welds
  • TZ Pyramid belts allow high material removal while producing a very fine finish
  • They are ideal for the initial grinding before polishing to a mirror finish
  • Because the grit fineness is increased slowly, it is possible to omit several operations
  • For use with grinding belt rollers

 
Request a Quote
Pipemax Pipe Grinder Also Available

  • Specifications
  • Tips and Tricks
  • Demo Video
Part No.GritSizeQuantity
49365A65/280 grit1.2" wide x 24" long10 / pack
49345A45/400 grit1.2" wide x 24" long10 / pack
49330A30/600 grit1.2" wide x 24" long10 / pack
49316A16/1200 grit1.2" wide x 24" long10 / pack
49306A06/2000 grit1.2" wide x 24" long10 / pack

tip close pipe construction

Fleece and felt belts with the patented buttonhole fastening system are ideal for working on closed pipe constructions and handrails. The grinding belt can be placed over the pipe and closed or opened again in a twist using the buttonhole system. Changing a belt is quick and easy. The belt can be opened and closed as often as required.
 
Closed belts such as the high-quality aluminum oxide belt or the “TZ” Pyramid belt must be cut open to work on closed pipe constructions. Place the belt over the pipe and join using our special adhesive tape (P/N 49000) over the entire length (approx. 370°).
 
For more Surface Finishing Tips & Tricks, click here.


Shortcuts:Downloads: